Choosing the right scope rings for a .22 rifle starts with fitment. Many rimfire rifles use a grooved receiver, commonly listed as a 3/8" dovetail or 11mm dovetail, while others may use a Weaver or Picatinny-style base. Before ordering, confirm your rifle’s mounting surface and match the rings to your scope tube size.

Mounts Plus offers .22 rimfire rings for popular rifle and optic setups, including 1-inch and 30mm scope rings from trusted brands such as Warne, Weaver, Burris, Leupold, Simmons, and Aim Sports. Compare ring height, material, finish, mounting style, and product fitment notes to find the right match for your rifle.

 

Find the Right Rings for Your Rimfire Rifle

Rimfire rifles are often different from centerfire rifles when it comes to scope mounting. A standard AR or hunting-rifle ring may not fit a grooved .22 receiver unless the rifle has a separate Weaver or Picatinny base installed.

Before choosing a ring set, check the following:

• Rail or receiver type: 3/8" dovetail, 11mm dovetail, Weaver, or Picatinny
• Scope tube size: usually 1 inch or 30mm
• Scope objective size and clearance needs
• Preferred ring height: low, medium, high, or see-through
• Material preference: steel or aluminum
• Brand and product-specific fitment notes

3/8" Dovetail vs. 11mm Dovetail Rings

Many American rimfire rifles use a 3/8" dovetail or grooved receiver. Many European-style rimfire rifles use an 11mm dovetail. These sizes are close, but they are not always interchangeable.

Some rimfire rings are made to fit both 3/8" and 11mm dovetails, while others are designed for only one rail size. Always read the product description carefully before buying.

3/8" Dovetail Scope Rings

3/8" dovetail rings are commonly used on many .22 rifles, including popular rimfire models from Ruger, Marlin, Henry, Savage, and similar platforms. These rings clamp to compatible grooved receivers or rimfire bases.

11mm Dovetail Scope Rings

11mm dovetail rings are often used on rimfire rifles from brands such as CZ, Tikka, Anschutz, and other European-style platforms. If your rifle uses an 11mm rail, choose rings clearly listed for 11mm compatibility.

Match the Ring Diameter to Your Scope Tube

1-Inch Rimfire Rings

Many traditional rimfire scopes use a 1-inch tube. If your scope has a 1-inch main tube, choose 1-inch rings in the correct height for your rifle and objective lens.

30mm Rimfire Rings

Some modern rimfire scopes use a 30mm tube. A 30mm scope requires 30mm rings. Do not use 1-inch rings on a 30mm scope, even if the rail style matches your rifle.

Choose the Right Ring Height

Ring height affects scope clearance, cheek position, and comfort behind the rifle. The goal is to keep the scope low enough for a natural cheek weld while still allowing clearance for the objective bell, bolt handle, and rear sight.

Low Rings

Low rings are often best for compact rimfire scopes with smaller objective lenses. They help keep the optic close to the bore and can support a comfortable shooting position.

Medium Rings

Medium rings are a practical choice for many general-purpose .22 rifle scopes. They usually provide more clearance than low rings without raising the optic too much.

High and See-Through Rings

High rings may be needed for larger objective lenses or rifles with clearance challenges. See-through rings can provide additional clearance, but they also raise the scope higher, so compare height carefully before choosing them.

Steel vs. Aluminum Rimfire Scope Rings

Steel Rings

Steel rings are a strong choice for shooters who want a durable, solid mounting option. They are usually heavier than aluminum rings but may be preferred for long-term setups or heavier optics.

Aluminum Rings

Aluminum rings are lightweight and often budget-friendly. They are a practical option for lightweight .22 rifles, casual range rifles, small-game setups, and youth rifles.

Popular Brands for .22 Scope Rings

Warne Rimfire Rings

Warne rimfire rings are a popular choice for shoppers who want durable construction and options for common dovetail receivers. They are available in different heights and tube sizes depending on the model.

Leupold Rimfire Rings

Leupold rimfire rings are a clean, dependable option for many 3/8" rail and 1-inch scope setups. They are commonly used for rimfire hunting, plinking, and range rifles.

Burris Rimfire and Airgun Rings

Burris offers rimfire and airgun rings for compatible dovetail receivers. These are useful for shoppers looking for practical scope mounting options across rimfire and airgun platforms.

Weaver, Simmons, and Aim Sports Rings

Weaver, Simmons, and Aim Sports offer value-focused options for common .22 rifle setups. These can be a good fit for replacement rings, budget builds, or simple rimfire optic installations.

Common Rimfire Rifles and Fitment Considerations

Many .22 rifles use a grooved receiver, but the exact mounting surface can vary by model and configuration. Always confirm your rifle’s rail size before ordering rings.

• Ruger 10/22
• Savage Mark II
• Marlin Model 60
• CZ 457 and CZ 455
• Tikka T1x
• Henry .22 rifles
• Anschutz rimfire rifles
• Rossi rimfire rifles
• Compatible air rifles with grooved receivers

What to Check Before Ordering

• Confirm your rifle’s receiver or rail type
• Match the rings to your scope tube diameter
• Choose the correct ring height for scope clearance
• Check whether the rings are steel or aluminum
• Confirm whether the rings are sold as a pair
• Review brand-specific and model-specific fitment notes
• Choose direct-fit dovetail rings or use the correct adapter if needed

Why Buy Rimfire Scope Rings from Mounts Plus?

Mounts Plus gives rimfire shooters a focused place to compare scope rings by rail size, tube diameter, height, material, finish, and brand. Whether you are mounting a compact scope on a plinking rifle or setting up a more precise rimfire target rifle, this category helps you narrow the options before you buy.

Browse .22 scope rings from trusted manufacturers and choose the ring set that best matches your rifle, optic, and mounting surface.

Frequently Asked Questions

What are .22 rimfire rings?

.22 rimfire rings are scope rings made for rimfire rifles, often with 3/8" or 11mm dovetail receivers. They hold the scope to the rifle and must match both the rifle’s mounting surface and the scope tube diameter.

What size scope rings do I need for a .22 rifle?

First, confirm your rifle’s rail or receiver type. Many .22 rifles use a 3/8" or 11mm dovetail. Then match the ring size to your scope tube, usually 1 inch or 30mm, and choose the correct height for clearance.

Are 3/8" and 11mm dovetail rings the same?

No. They are close in size, but they are not always the same. Some rings are designed to fit both 3/8" and 11mm dovetails, while others fit only one size. Always check the product listing.

Will rimfire rings fit a Ruger 10/22?

Many Ruger 10/22 setups use 3/8" rimfire rings or a separate scope base, depending on the rifle configuration. Confirm whether your rifle uses factory grooves, a Weaver-style base, or a Picatinny rail before buying rings.

Will these rings fit a CZ 457 or CZ 455?

CZ rimfire rifles commonly use an 11mm dovetail. Choose rings listed for 11mm dovetail rails or rings clearly marked for both 3/8" and 11mm dovetail fitment.

Do I need 1-inch or 30mm rings?

The ring diameter must match your scope tube. A 1-inch scope needs 1-inch rings. A 30mm scope needs 30mm rings.

Should I choose low, medium, or high rings?

Low rings work well for smaller objective lenses when clearance allows. Medium rings fit many common rimfire scopes. High rings may be needed for larger objective lenses or additional clearance.

Are steel or aluminum rings better for a .22 rifle?

Steel rings are typically stronger and heavier. Aluminum rings are lighter and often a good choice for lightweight rimfire rifles. The better option depends on your rifle, scope, and weight preference.

Can rimfire rings be used on air rifles?

Some rimfire rings also fit air rifles with compatible 3/8" or 11mm grooved receivers. Confirm the rail size and product compatibility before ordering.

Do I need a dovetail-to-Weaver adapter?

You may need an adapter if your rifle has a 3/8" or 11mm dovetail but your rings are made for a Weaver or Picatinny base. For a direct fit, choose rings made for your rifle’s dovetail size.