Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate

Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate

Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate

Shown with original USGI sling swivel (not included)

Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate Shown with an aditional  3 slot rail
Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate Shown with an aditional  3 slot rail Sadlak Industries M14/M1A Heavy Duty Front Rail with Internal Nutplate Shown with an aditional  3 slot rail
click to enlarge

The Heavy Duty Model takes advantage of the Sadlak Internal Oval Nutplate using two socket head screws installed externally through the two counterbored holes in the rail. This model allows the removal or replacement of the rail without removing the stock. Depending on the stock, initial installation of the internal nutplate may require Dremel work to recess the oval plate flush to the inside surface.

As illustrated at the right, your original USGI sling swivel is securely held in place by the grooves on the underside of the rail

The Nutplate is installed in the thickest area of the stock

The internal nut plate supplied with the Heavy Duty Fron Rail is significantly stronger than screws and washers and will take the additional load from the bipod without danger of splitting or cracking the stock

Once the HD Front Rail (140062) is installed you have flexibility of attaching a clamp-on type Bi-Pod . All hardware and screws have mil-spec. Manganese Phosphate finish. The internal Nut Plate can be further supported by permanently bedding it into the stock using Devcon Steel Epoxy or other bedding compound.

 

Customer Ratings & Reviews

6
Ratings Snapshot
4.7
out of 5
5 (4)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
4.7
out of 5
5 (4)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
6 Total Reviews
Sadlak M14/M1A Front Rail
5 out of 5
Location: NW Washington
Date: October 4, 2013
Sadlak makes some the best accessories for the M1A/M14 market. This front rail fits the OEM wood stock as if it were factory equipment. The attention to detail and overall excellent quality is very evident. Heavy duty, well designed, top quality, no complaints.
Recommended
quality equipment
5 out of 5
Location: new iberia la
Date: October 26, 2012
looks great, works great, recessed nut plate into stock. made foe a very clean install
Recommended
Can adapt
4 out of 5
Location: Myrtle Creek, OR
Date: June 18, 2012
When I reviewed this prior to purchasing I went to facebook and a customer was installing on a Socom 16. The wood stock on the M14/M1A is virtually identical to the Socom except that as near as I can tell the comp forestock on the socom has inset screws whereas the M14/M1A does not which made the the internal nut plate not required in my case and the screws that came with the product were too short. Once I found the longer screws I required at a local hardware store everything mounted fine and was able to install the foreend grip on the newly installed front rail.
Recommended
Sadlak M14/M1A HD Front Rail
5 out of 5
Location: New Brunswick, Canada
Date: May 18, 2012
Precision made, easy install, and fast shipping. Excellent overall.
Recommended
Sadlak M14/M1A HD Front Rail
4 out of 5
Location: Iowa
Date: May 1, 2012
This is a very well made piece of gear. I used it to mount a bipod on a GI fiberglass stock I am modifying.
Recommended
6 Total Reviews
MSP Code: SIL-140062
Price: $75.00

Stock Type:
Ratings Snapshot
4.7
out of 5
5 (4)
4 (2)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%


You May Also Like
Mounting Solutions Plus ©2016 All Rights Reserved (305) 253-8393,
10655 S.W. 185 Terrace Miami FL 33157