Primary Arms Deluxe AR-15 Cantilever Scope Mount - 30mm
The Primary Arms Deluxe AR-15 Scope Mount is ideal for M4, AR-15, and similar “flat-top” 1913 Picatinny mounting platforms. Aluminum construction, durable matte black anodized finish. 2.52 inches of clearance between the rings. Places the center of your 30mm tube scope 1.5 inches above the rail. Fits scopes with 30mm tubes. This tough mount features a 1-year warranty.
To make sure that the mount nut is fully tightened, turn the nut clockwise until resistance is encountered. After that, turn another 1/2 turn. If a torque wrench is being used, we recommend no more than 35-40 in-lbs.
The distinction between inferior quality and premium Cantilever Scope Mount is undeniable. At MSP, we only offer scope mounts from the most trusted brands like Primary Arms. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Good ar15 cantilever scope mount
Good ar15 cantilever scope mount for the money, offset is the way to go with larger scopes and this fits the bill. I used this with the Primary Arms 1-6 scope with ACSS reticle and the combo is great and looks good on my AR.
Primary Arms deluxe ar15 scope mount
I mounted this on my AR15 300 AAC with a Nikon P300. The mount is affordable and is rock solid. It allows the scope to be mounted forward on the receiver, which is required on the AR platform for proper eye relief. The scope retained zero when I removed the mount and then put it back on. I highly recommend this mount for anyone who wants to put a scope on an AR platform.
primary arms scope mount
This is a very nice ar-15 cantilever mount. I was looking for a scope and a mount that was not too heavy, though. I bought a Primary Arms 1x 6 scope for my 300 blackouts. The scope was 15 ounces, and this mount was almost 9. It was too heavy, and I returned it. I bought a 2.4-ounce mount from eBay.
ar15 cantilever scope mount
A solid ar15 cantilever scope mount that is easy to install. Should work well for just about any scope. The instructions were clear and easy to follow. This isn't a quick change mount, but if you have only one rifle, this mount is for you. It is recommended that you use blue (number 242) Loctite on the screws, but that is just for insurance. With the recommended torque settings, nothing should come loose.
primary arms deluxe ar-15 scope mount - 30mm
Heavy Duty and a high mount but with issues. 1. the amount will not mount on a pic rail, so it maintains a level balance. It starts out ok, but when you tighten it down, it goes off level. So when you mount your scope- the scope is off level, so you have to make the scope attain level using a small level-Don't eye-ball it use a level. 2. the mount is so high I could not bore sight it using a laser bore sight. With the scope cranked down as far as it would adjust, I was still two feet above the red dot @ 35 feet. Went to the range- set up at 25 yards gun was shooting 16 inches high. The next range trip will go to 50 for five shots, then 100 for a zero Pluses Unit is sturdy and high but you have to be aware of the above issues.