Burris XTR 34mm Signature Tactical Scope Rings

4

| Write a Review

Ratings Snapshot

5.0

out of 5

5 (4)

4 (0)

3 (0)

2 (0)

1 (0)

Would recommend this product.

100%

SKU: 126-BUR-XTR34MM
Manufacturer: Burris

This is an exceptional product! It is rare when a product lives up to it's hype, but these rings do. Although a little bulky due to the plastic sleeves, they are not excessively heavy. I have not weighed them, but they feel lighter in hand than my Warren and Talley rings. They hold zero, protect your scope from marring and allow you to center your reticle without using up your turrets adjustments. Just maybe the best rings for long-range target rifles that you can buy.I have two pair and plan to replace one more on another rifle whose present set of rings or action is so far off being in line that almost all of the scopes windage adjustment is used up just to center the reticle on the target.

I use these Burris xtr signature rings (both 30 and 34mm) on pic rails that do not have MOA built into bases. Allows efficient use of your scope's adjustment range, effectively giving you additional upward bullet impact for extended range impacts. I have found installation quick and easy. (Follow instructions) Never had rings slip or POI shift. They have the additional benefit of not putting any "ring bite" onto the tube body. If you ever want to move the scope to another rifle or sell it, a pristine tube is a definite plus. With features no other manufacturer offers at a very competitive price point, they can't be beaten.

I had purchased a high-end 34mm scope and was considering how I should mount it when I came across these Burris signature scope rings. Should I get the 20-degree base and use standard tactical rings or try this radically different approach? I am an alpha type of guy prone to experiment, so I thought, why not. I read the other reviews, so I knew there might be a learning curve to their use, but I went ahead and purchased them. I have to say that I am usually hard to impress, but right out of the box, I was blown away. They are packaged in very high quality, rubber gasketed boxes that you will find many uses for. They attach to your rail base like any other set of rings. The inserts are marked with their degree and orientation (up or down expressed as + or -). There is no lapping required and no marring of your $$$$$ scope you just purchased. What I did was to set the rifle up on sandbags on the range and then bore sight with scope run down to the lowest setting. This gives maximum elevation adjustment when completed and see which combo works best. You can even correct for a significant windage problem by canting them off-center. You need to experiment. I found it no more complicated than a regular boresight. After tightening everything down, I shot some fantastic groups which verified there was no slippage or loss of zero. I can say that I am now in the process of switching several of my long-range rifles over to this system because it works. It allows elevation from zero to 40 MOA.

Bought these Burris xtr signature rings to hold down a big 34mm scope, and it does that job great. The inserts are an excellent addition to add forward cant to the scope plus they help keep from damaging a costly scope. The storage box the rings come in also is a plus!