Vortex Precision Matched Rings 34mm
Machined with certified USA 7075 T6 billet aluminum and held to an extremely tight tolerance of .0005 inches using a precision Computer Numeric Controlled (CNC) mill. These Vortex rings are then serialized, vibratory tumbled, bead blasted and finished with a Type III hard coat anodize.
- Rugged, lightweight, anti-snag design
- Robust, Grade 8 fasteners
- 100% made in USA guaranteed for life
- Base Clamp Screws 45-50 in/lbs
- Ring Screws 15-18 in/lbs
|Medium - PMR-34-92||Medium - PMR-34-100||Medium - PMR-34-1.1||High - PMR-34-126||Extra High - PMR-34-145|
|Center Scope Height||.92 inches (23.4 mm)||1.00 inch (25.4 mm)||1.10 inches (27.9 mm)||1.26 inches (32.0 mm)||1.45 inches (36.8 mm)|
|Weight (per ring)||65 grams (2.3 oz)||70 grams (2.5 oz)||70 grams (2.5 oz)||75 grams (2.6 oz)||80 grams (2.8 oz)|
The distinction between inferior quality and premium 34mm scope rings is undeniable. At MSP, we only offer Vortex Scope Rings from the most trusted brands like Vortex Optics. Buy with confidence that we stand behind the product we sell.
Customer Ratings & Reviews
Perfect alignment on my scope from the start
Installed the rings with my Razor HD. Everything was perfectly aligned right away. Never felt the need to lap. I was worried about going two piece, but with the ease and quality of these rings, those worries went away quickly.
Put a ring on it
I use these rings on my m4 style rifle that I leave mostly in its padded range bag. Once they were installed and torqued correctly, I haven't had to make any adjustments in over a year and a half. My zero hasn't drifted, and the scope itself hasn't budged the least bit. I'm thrilled with the quality and finish of these rings and would be perfectly happy buying another set.
Best rings out there
I have had these 34mm rings on my rifle for well over two years now, holding a Burris XTRii. They worked wonders. I had a slight problem two years later. I was having a wandering zero. Once zeroed, the rifle would shoot great all day, out to 1k and back without a hitch. But the next day, my zero would shift. Since I had my gen one razor on the way, I decided to pull everything off. Due to my error and over-torque with loc tite (wet vs. dry torque specs) I caused SEVERAL of the screws to fail. My rifle still shot lights out, only being held in by half the screws. The screws failed because of me, but my rings were replaced without any questions. Great job with these rings!
Put these rings on my model 7 with a pic rail. The low rings have a ton of room for large objectives. My scope has a 44mm bezel, and there is more than enough room. Do yourself a favor and make sure you have a lock-tight and a torque driver.