My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
Buffer Technologies AK/Valmet/Galil Recoil Buffer
    Buffer Technologies AK/Valmet/Galil Recoil Buffer
    Purchase Buffer Technologies AK/Valmet/Galil Recoil Buffer
    • Buffer Technologies AK/Valmet/Galil Recoil Buffer
      Ratings Snapshot
      4.7
      out of 5
      5 (11)
      4 (5)
      3 (0)
      2 (0)
      1 (0)
      Would recommend this product.
      100%
      SKU: BUFT-AK1
      UPC: 855727000020
      Manufacturer: BUFFER TECHNOLOGIES

    • $14.95

      Quantity in Basket:  None

    •  

    Buffer Technologies AK/Valmet/Galil Recoil Buffer

    The AK/Valmet Recoil Buffer™ fits on the recoil spring guide rod of any Kalashnikov style weapon. This includes AKs, Valmets, Galils, Vepr, and MAK 90s, just to name a few. Installation takes less than a minute and can be done without any special tools. What makes the kalashnikov action so reliable, is also what causes its inevitable downfall, the violent manner in which it works. Each time you fire your rifle the gas system propels the bolt carrier to the rear very violently, which generates a shock wave that is absorbed by the metal receiver. After a period of time, this repeated pounding causes the action itself to lose its structural integrity. The most notable side effect of this is the difficulty one has in controlling the weapon during rapid fire. By installing a Recoil Buffer™ you totally eliminate the metal to metal impact of the bolt carrier to the receiver and most of the action noise.

    Those whose who install Recoil Buffers™ into their AK's will not only be protecting their investment by prolonging its service life, but they will also find that the recoil is reduced and muzzle stability is increased. In fact, Recoil Buffers™ can do this for any gun! They work so well that many people believe they should be installed in all guns by their manufacturers. Unfortunately, this is not yet the case. So, until that time comes, make sure your weapon functions as well as it possibly can!

    AK 47 Recoil Buffer Install

    AK Quick Links:


    What Is A Recoil Buffer?? What Can It Do For Your Gun?

    A Recoil Buffer is a product designed by Buffer Technologies to cushion the trauma your bolt and receiver experience during normal cartridge discharge.

    Each carefully designed buffer is made from a polyurethane with specific shock-absorbing properties. When it is placed between the bolt and what it slams against at the extreme range of its travel, the buffer acts as a gentle cushion. Without the buffer, the bolt is driven backwards to make direct violent contact with another piece of steel. In time, this pounding takes its toll. The gun becomes less accurate and the action becomes dangerously loose.

     

     

    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

    Customer Ratings & Reviews

    16
    Ratings Snapshot
    4.7
    out of 5
    5 (11)
    4 (5)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    4.7
    out of 5
    5 (11)
    4 (5)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    16 Total Reviews

    Recoil Buffer

    4 out of 5
    Location: NY
    Date: October 10, 2011

    Nice piece, fits well, and realy changed the dynamic of the recoil.

    Recommended

    a longevity must

    4 out of 5
    Location: SWMO
    Date: April 23, 2011

    This item is a must have for your AK 47, especially those of us who own stamped receivers. Not only will this product extend the life of your recoil rod and spring, but it also extends the life of your receiver and actually noticeably lowers recoil a slight bit. I have installed a recoil buffer in every AK I have owned, and it is always one of the first mods. Buffer Tech also makes great recoil buffers for Glocks, FN FAL, etc... I did a review of the product on my gun mod review page, http://GunModReview.com Mods feel free to check out the site.

    Recommended

    recoil buffer

    5 out of 5
    Location: belton sc
    Date: January 30, 2011

    had to dremel out hole alot more than i was comfortable with does not fit wasr10 without modifications im afraid that the product has lost its strength and will not hold up long

    Recommended

    recoil buffer

    4 out of 5
    Location: belton sc
    Date: January 30, 2011

    solid product but does not fit a wasr10 had to dremel out the hole a good but which has me wondering if it has degraded the product and the life of the product not real impressed with this item and had to wait over 2 weeks for delivery

    Recommended

    AK Recoil Buffer

    5 out of 5
    Location: Florida
    Date: June 17, 2010

    Alright , this is a good buffer and the will definitely be easier on your rifle once installed and used . Received it and put it through the spring to slide it to the end of the receiver , did not fit at first had to hollow the hole out , so it was a little bit bigger for the AK 47 Romanian .. don't worry this item will not break its Quality USA made ..

    Recommended

    AK/Valmet/Gailil Recoil Buffer

    4 out of 5
    Location: TX
    Date: March 20, 2010

    bought this for my polish underfolder. fit perfect. very precisely cut and seems like strong material. fires great!!

    Recommended
    16 Total Reviews


    Related Products



    AK Handguard

    AK Accessories