My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
EGW Dovetail Sight Mount For DeltaPoint Pro with Colt Gold Cup, Python, Anaconda
    EGW Dovetail Sight Mount For DeltaPoint Pro with Colt Gold Cup, Python, Anaconda
    Purchase EGW Dovetail Sight Mount For DeltaPoint Pro with Colt Gold Cup, Python, Anaconda
    • EGW Dovetail Sight Mount For DeltaPoint Pro with Colt Gold Cup, Python, Anaconda
      Not Yet Rated | Write the First Review SKU: 198-49-421
      UPC: 841370107261
      MFG#: 49421

    • MSRP: $49.95
      $44.99

      Quantity in Basket:  None

    •  

    EGW Dovetail Sight Mount For the DeltaPoint Pro (fits Shield RMS/RMSc/SMS, JPoint, Redfield Accelerator, and Optima) for Colt Gold Cup, Python, Anaconda

    Mounting Hardware is Included

    This mount fits:

    • Colt Gold Cup
    • Colt Trooper Mark 3
    • Colt Python
    • Colt Anaconda*


    This is for Colt models with the Elliason style adjustable rear sight.

    The elevation screw from the original rear sight is re-used in the center hole on this mount unless you have an Anaconda. An extra screw is available for purchase below as well.

    *Anacondas require a new elevation screw due to the design of the elevation screw supplied with the gun.

    *For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.

    Material: 7075 Aluminum
    Coating: Matte Black Hardcoat
    Overall Length: 1.604"
    Overall Width: .99"
    Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 Set Screw, (1) 6-32 Torx Head Screw
    Red Dot Fitment: Leupold DeltaPoint Pro, JPoint, Shield RMS/RMSc/SMS, Redfield Accelerator, Optima, Holosun 407K/507K (the rear pins on the mount must be removed for the Holosun 407K/507K to sit on the mount)

    EGW red dot mounts are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.\

    Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

    Installation Instructions
    - Remove the rear sight*
    - Install the EGW Sight Mount
    - Tighten set screw (if applicable)
    - Place the red dot sight on the EGW Sight Mount
    (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)
    - Apply blue Loctite to the provided mounting screws
    - Torque mounting screws to 15in/lbs

    Modification of your firearm may nullify the manufacturer's warranty.
    This product should be installed and checked by a qualified gunsmith.
    No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.


    The distinction between inferior quality and premium scope mount is undeniable. At MSP, we only offer red dot mounts from the most trusted brands like Evolution Gun Works. Buy with confidence that we stand behind the product we sell.

    Customer Ratings & Reviews

    Be the first to rate this item!

    Write Review


    Related Products