My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 4.95
Product Search

Secure Checkout
EGW Sight Mount For the Burris Fastfire, Vortex Venom & Viper for Kimber 1911s with Fixed Rear Sight
    EGW Sight Mount For the Burris Fastfire, Vortex Venom & Viper for Kimber 1911s with Fixed Rear Sight
    Purchase EGW Sight Mount For the Burris Fastfire, Vortex Venom & Viper for Kimber 1911s with Fixed Rear Sight
    • EGW Sight Mount For the Burris Fastfire, Vortex Venom & Viper for Kimber 1911s with Fixed Rear Sight
      Not Yet Rated | Write the First Review SKU: 198-493-15
      UPC: 841370112890
      Manufacturer: EGW - Evolution Gun Works
      MFG#: 49315

    • MSRP: $49.99
      $44.99

      9 available for immediate delivery

      Quantity in Basket:  None

    •  

    EGW Sight Mount For the Docter, Burris Fastfire, Vortex Venom, and Vortex Viper for Kimber Fixed Rear Sight

    Material: 7075 Aluminum
    Coating: Matte Black Hardcoat
    Overall Length: 1.811"
    Overall Width: .99"
    Dovetail Width: .355"
    Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw
    Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Docter

    This mount fits:
    Kimber 1911s with Fixed Rear Sights

    Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.

    Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included.

    Installation Instructions
    - Remove the rear sight*
    - Install the EGW Sight Mount in the dovetail
    - Tighten set screw (if applicable)
    - Place the red dot sight on the EGW Sight Mount
    (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)
    - Apply blue Loctite to the provided mounting screws
    - Torque mounting screws to 15in/lbs

    2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights
    2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights

    The screws that are included with this mount require a 5/64'' allen wrench for installation.

    Modification of your firearm may nullify the manufacturer's warranty.
    This product should be installed and checked by a qualified gunsmith.
    No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.

     

     

    Customer Ratings & Reviews

    Be the first to rate this item!

    Write Review