My Cart: 0 item(s)
EGW Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi, M2, Weaver 93, Stoeger M3000 Scope Mount
Description
Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided
Type of Mount: Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi, M2, Weaver 93, Stoeger M3000
Center Spread: 2.05"
Overall Length: 5.488"
*The center spread is the distance between the two middle holes, center to center, on your receiver.
This base sits at approximately 0.4 high.
This base fits the Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi/M190, M2, Weaver 93, Stoeger M3000.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.
EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This Evolution Gun Works (EGW) mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Finish: Matte Black Only
Mounting Hardware: Hex Head Screws and Wrench Provided
Type of Mount: Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi, M2, Weaver 93, Stoeger M3000
Center Spread: 2.05"
Overall Length: 5.488"
*The center spread is the distance between the two middle holes, center to center, on your receiver.
This base sits at approximately 0.4 high.
This base fits the Remington 4, 6, 7400, 750, 7600, 7615, Benelli Auto/Super Black Eagle/Vinchi/M190, M2, Weaver 93, Stoeger M3000.
Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.
The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights.
EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.
This Evolution Gun Works (EGW) mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
Add EGW's Practical or HD Scope Rings to make it a complete overhaul!
We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(4)
4
(1)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(4)
4
(1)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
5 Total Reviews
- 1
Some adjustment required
frosty
Location: Nebraska
Date:
April 4, 2019
The mount installed easily, but when I went to boresight the scope, the crosshairs were much higher than the amount of scope adjustment. So, I put a .100 shim under the rear of the mount and brought the crosshairs to nearly perfect alignment from the centered position. I don't know whether the problem is the model 7600 pump or the mount. It was not a big thing to correct unless someone purchased it who had no prior experience with scope mounting.
Verified Buyer
Recommended
Good Service
Location:
Date:
September 20, 2017
Their follow up on B.O.'s is great.
Verified Buyer
Recommended
EGW scope mount for Remington 7400
jim
Location: utah
Date:
February 8, 2017
Well made, just like all EGW parts. Extra length allows flexibility for mounting scopes or red dots.
Verified Buyer
Recommended
EGW scope mount for Remington 7400
Jim
Location: Utah
Date:
February 7, 2017
This mount is solidly made, just like all EGW products. The extra length gives you flexibility for mounting scopes or red dots.
Verified Buyer
Recommended
EGW scope mount for Remington 7400
Jim
Location: Utah
Date:
February 7, 2017
This mount is solidly made, just like all EGW products. The extra length gives you flexibility for mounting scopes or red dots.
Verified Buyer
Recommended
5 Total Reviews
- 1
