My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
Sadlak Airborne M1A Scope Mount, Lightweight Steel
    Sadlak Airborne M1A Scope Mount, Lightweight Steel
    Purchase Sadlak Airborne M1A Scope Mount, Lightweight Steel
    • Sadlak Airborne M1A Scope Mount, Lightweight Steel
      Ratings Snapshot
      4.7
      out of 5
      5 (22)
      4 (2)
      3 (0)
      2 (1)
      1 (1)
      Would recommend this product.
      100%
      SKU: SIL-140015
      UPC: 13964034769
      Manufacturer: SADLAK

    • MSRP: $325.00
      $315.30

      Quantity in Basket:  None

    •  

    Sadlak Airborne M1A Scope Mount - Lightweight Steel

    For M1A / M1A Rifles

    It was inspired by the Brookfield Precision Tool special production run of light weight steel mounts for the special forces in the 1980's

    Sadlak Industries had been loaned an original Brookfield Light-weight mount several weeks before the 101st Airborne called expressing their interest in a lighter steel mount. Sadlak Industries had the interest and now they had an urgent need so they rose to the challenge to expedite it since their unit was about to deploy in a few weeks and we didn't want to let our brave troops down.

    Sadlak Industries did our initial design overnight and had the first prototypes for heat-treat and testing in 2 days. They were cautious in where and how much material to remove to avoid compromising the over-all strength of the new light-weight mount. After many design revisions and prototypes and a few 18hr work days, Sadlak Industries had the right balance and production began. Mike Sadlak and his dedicated precision tool-makers worked tirelessly through many nights to deliver the finished mounts to the 101st Airborne on time.

    It was a proud day for the employees at Sadlak Industries LLC. We thank the 101st and our military for the opportunity to serve them for a change!

    See thru Channel Using Iron Sights with a Sadlak M1A Scope Mount Similar to the original Brookfield Precision Tool mount; the Sadlak mount also has a U-shaped channel thru the precision machined Picatinny rail that provides an opening under the rings to use the iron sights with the scope and rings attached.

    Features and Benefits of the Sadlak Airborne Scope Mount:

    • Airborne Model Steel Scope Mount 9.0 oz
    • 20% Lighter than our standard steel mount
    • Precision Mil-Spec Picatinny Rail and see-thru U-Channel for Iron sight us
    • Rail Hardened to 45-50 Rc for a toughand strong mounting platform.
    • Manufactured from solid Chrome-Moly Steel bar. Not Investment Cast
    • 5 degree Case Deflector angle milled onthe underside of Rail.
    • Proven Brookfield type 3-point contact Design. The best type for the M14 Rifle to prevent loosening.
    • Mil. Spec. Manganese phosphate finish (a.k.a. Parkerizing)
    • Includes all mounting hardware, fasteners, and hex wrenches anddetailed instructions

     

    Elevate your M1A rifle's performance with our top-tier M1A Scope Mount, available now at Mounts Plus. Precision-engineered for durability and reliability, our M1A Scope Mount offers a seamless fit for your rifle, ensuring enhanced accuracy and stability for every shot. Ideal for both professional marksmen and recreational shooters, this scope mount is designed to withstand the rigors of extensive use, maintaining its precision over time. Discover the difference in your shooting experience with our M1A Scope Mount, crafted to meet the highest standards of quality and performance. Visit www.mountsplus.com today and transform your M1A rifle into a more versatile and accurate firearm.

    Alt Description:

    • Sadlak airborne mount
    • Sadlak m1a mount
    • Sadlak scope mount

    Related M1A Links :


    The distinction between inferior quality and premium M1A Scope Mount is undeniable. At MSP, we only offer M1A Accessories from the most trusted brands like Sadlak Industries. Buy with confidence that we stand behind the product we sell.

     

    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

    Customer Ratings & Reviews

    26
    Ratings Snapshot
    4.7
    out of 5
    5 (22)
    4 (2)
    3 (0)
    2 (1)
    1 (1)
    Would recommend this product.
    100%
    4.7
    out of 5
    5 (22)
    4 (2)
    3 (0)
    2 (1)
    1 (1)
    Would recommend this product.
    100%
    26 Total Reviews

    Extremely well built. Great customer support.

    5 out of 5
    Location:
    Date: February 22, 2023

    This is an exceptionally well-built and aesthetically pleasing mount. Don't be fooled by the "Lightweight Airborne" label - this is still a heavy-duty piece. I was initially concerned that it wouldn't fit on my Polytech M-14S rifle, but it fits perfectly. The instructions are incredibly thorough, and Sadlak even includes a troubleshoot sheet with tools (pins) to assist you in determining whether your rifle is within specifications. It's important to note that you will need to remove your stripper clip guide to accommodate the mount. My Chinese rifle made this process challenging, but with some patience and persistence, it can be done. I am currently using Burris Low XTR rings with an SWFA SS 10x42 Tactical Riflescope (MilRad), which provides 0.05" clearance over the rear sight.

    Recommended

    Sadlak steel airborn mount fits correctly

    5 out of 5
    Location:
    Date: February 22, 2023

    This is an impressive scope mount that I would recommend. I purchased the steel version, as a few additional ounces of weight don't make a difference to me. The manufacturer thoughtfully included two precision ground pins that you can use to verify whether the groove milled into the side of the receiver conforms to mil-spec standards, thus ensuring a stable mounting point. As long as you follow the instructions precisely, you should have no difficulty installing the mount, unless your receiver is out of spec. It's worth noting that you will require a butt stock cheek riser to use this mount with any scope, as the standard stocks are intended for use with iron sights. The quality of the mount is exceptional, and you can trust that it will perform reliably over time.

    Recommended

    Don't waste your time with anything else

    5 out of 5
    Location:
    Date: February 22, 2023

    Look no further than this mount - it is undoubtedly the best of the best for an M1A. Those quick-detach mounts lose zero every time you clean your rifle. With this mount secured to the rifle itself, it remains rock solid and holds zero all the time. However, there is one warning to be aware of: if you run a Sage EBR chassis, you'll need to get a modified version where the front three rails are removed. Sadlak offers this service, or you can purchase a modified version directly from them. Alternatively, you can opt for a modified top cover for the EBR, but I chose to keep the chassis intact. The Sadlak customer service is what prompted me to write this review. I've never encountered better service from any vendor. They were immediately responsive, and when I realized the Sage EBR issue (my mistake), they rectified the problem at no cost. Not only is this mount perfectly machined, but they also back it up 100%. They followed up with me several times to ensure that the mount installed correctly and performed as expected. In summary, you cannot go wrong with this product. It's an exceptional mount that is well worth the investment, and the customer service is unparalleled.

    Recommended

    So much better than the SA 4th gen mount. This will let you see what accuracy you're gun is capable of.

    5 out of 5
    Location:
    Date: February 22, 2023

    If you're seeking a reliable scope mount that supports the accuracy of your M1A rifle, then your search ends here. The SA 4th generation mount doesn't compare to this one. Before installing this mount on your rifle, it's advisable to thoroughly read the instructions. While I initially skimmed through them (who needs instructions, right?), I had some difficulty with the first installation by tightening the forward screw too much. The forward screw should only come in contact with the front part of the receiver to stabilize the mount. The side bolt and cam-lock washer, along with the 3 set screws for dovetail insert in the stripper clip guide, hold everything in place. The front set screw (inside the Picatinny rail on the barrel end of the mount) braces the front of the mount like a tripod. Avoid overtightening the forward set screw; just tighten it 1/4 turn after it makes contact with the receiver. This mount is incredibly functional, and it comes with a one-time use lock tight to ensure that none of the bolts or screws back out. I've fired around 100 rounds through my SOCOM 16 using this mount, and nothing has moved or come loose. I'm thrilled to have a full-sized scope on my M1A, as opposed to iron sights or a scout type scope. Now that I've proven that I have a sub-1" gun at 100 yards, it's an amazing feeling.

    Recommended

    Great piece of steel

    5 out of 5
    Location: France
    Date: September 4, 2021

    Excellent mount for the M1A, I am fully happy with it. Can't wait to test it at the range.

    Verified Buyer Recommended

    Dr.

    5 out of 5
    Location: U. S. A. , Cincinnati, Ohio
    Date: August 7, 2021

    I ordered the Sadlak scope mount in January and waited for it until July..this is not a complaint. The people at Mounts Plus stayed in touch with me the whole time; they were great.

    Verified Buyer Recommended

    Head Potato

    5 out of 5
    Location:
    Date: October 21, 2020

    I received the M1A scope mounting bracket promptly and it worked better than any other. Great product. I know it is difficult to provide great service during this covoidemocratic problem, but you really did great.

    Verified Buyer Recommended

    Sadlak Mount

    5 out of 5
    Location: San Diego, Commiefornia
    Date: August 17, 2020

    The mount fit perfectly on my M1A Scout and I had no issues at all as I have heard other mounts out there have some issues with getting them to fit right. Sadlak is suppose to be the best and it worked well for m.

    Verified Buyer Recommended

    Sadlak Airborne M1A mount

    5 out of 5
    Location: Penna
    Date: August 17, 2020

    fast shipping and very friendly service

    Verified Buyer Recommended

    Awesome mount for the M1a

    5 out of 5
    Location: CALIFORNIA
    Date: July 11, 2020

    Read a lot of good reviews about these mounts and they are true. Very solid build. Very solid mounting. Premium price for a premium piece. So glad I ordered this, now to put some rounds down range.

    Verified Buyer Recommended

    Sadlak lightweight airborne

    5 out of 5
    Location: Virginia
    Date: July 11, 2020

    Have been looking for this mount for months now and found the best desl here at MSP. It's a solid mount is holding a Vortex Strike Eagle 5-25x56.

    Verified Buyer Recommended

    Sadlak lightweight airborne

    5 out of 5
    Location: Virginia
    Date: July 11, 2020

    Have been looking for this mount for months now and found the best desl here at MSP. It's a solid mount is holding a Vortex Strike Eagle 5-25x56.

    Verified Buyer Recommended
    26 Total Reviews


    Related Products



    Explore the ultimate range of M1A scope mounts and M1A accessories on MountsPlus.com. We take pride in providing top-quality, durable, and reliable solutions that enhance your shooting experience. Our Sadlak Airborne M1A scope mount is precision-manufactured to offer perfect fit and superior performance. Whether you're an experienced marksman or a beginner, our selection of M1A accessories ensures that you'll find just what you need for your firearm. Trust MountsPlus.com for all your M1A scope mount and M1A accessories needs, and experience a seamless blend of quality and service.

    M1A Scope Mount

    Scope Mount