My Cart: 0 item(s)
MUZZELITE
BULLPUP RIFLE STOCK
for the
MARLIN 60 TUBULAR FED
OPTIONAL: Muzzelite Bags |
|
 |
 |
click to enlarge |
The most striking feature of the MUZZELITE bullpup stock, when attached to your action, is the overall length of 26-1/2". This allows you to carry the rifle with much greater mobility. Whether your sport is hunting or plinking, the MUZZELITE bullpup stock will convert a long rifle into a compact weapon system in just a matter of minutes!
The stock itself has fixed sights which are adjustable for windage and elevation. The windage is done with the rear sight and the elevation is done with the front sight. The stock also comes equipped with a scope mount which attaches in the handle.
Construction is of fiberglass reinforced plastic. Required Allen wrench is included.
Please note:
- Bullpup stocks cannot be fired in a left handed position and are therefore only suitable for right handed shooters.
- Some high capacity magazines may not clear the pistol grip.
- No order to Canada
WARNING
To comply with Federal Law, not only must your rifle have a 16 inch or longer barrel, but the overall length of the weapon must be 26 inches or greater. Placing a rifle with a relatively short barrel in a Muzzelite stock may result in violation of the 26 inch length restriction, even though the barrel length remains in compliance. Muzzelite stocks are 23 inches long, and so require a minimum of 3 inches of barrel extension beyond the stock.
It is your obligation to measure the overall length of your weapon, out of the stock, to ensure it will remain in compliance with the 26 inch length restriction when placed in a Muzzelite stock. If your weapon has a barrel that complies, but the overall weapon length will not meet the 26 inch restriction if placed in a Muzzelite stock, do NOT, repeat NOT, assemble your weapon in the Muzzelite stock.
Remember that these restrictions are only those imposed by Federal law. Some states or localities may impose additional restrictions. It is your obligation to research ALL laws applicable to your locale, and to remain in compliance with ALL applicable laws, not just Federal restrictions.
This notice does not apply to any NFA weapon to which length restrictions are inapplicable, which has been lawfully approved for possession by the BATFE and local governments.
Again, it is your obligation to ensure that your weapon remains in compliance with ALL applicable length restrictions. Muzzelite is not responsible for your assembly of non-compliant weapons.
More Bullpup Links:
- Ruger 10/22 bullpup
- 10/22 bullpup
- ruger 10/22 takedown stock
- Ruger 10/22 bullpup stock kit
- Ruger 10/22 chassis bullpup
- 10/22 bullpup stock
- 10/22 bullpup rifle kit
- Bullpup 22
- Ruger 10/22 conversion kit bullpup
- Bullpup 10/22
- 10 22 bullpup
- Ruger 10/22 bullpup stock
- Ruger 1022 bullpup conversion
- 1022 bullpup
- 22lr bullpup conversion
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(7)
4
(3)
3
(2)
2
(1)
1
(2)
Would recommend this product.
73.3%
out of 5
5
(7)
4
(3)
3
(2)
2
(1)
1
(2)
Would recommend this product.
73.3%
Love this
Tony
Location: Long Island NY
Date:
August 12, 2022
Easy to put together. The only thing I would change is the trigger offset I would make it out of aluminum.
Verified Buyer
Recommended
Really cool looking, but not the best quality!
Shawn
Location: Maine
Date:
July 22, 2022
The instructions are HORRIBLE, and a lot of the edges didn't line up well. I am disappointed in the overall quality of the pieces, it seems cheaply manufactured. I'll be using it to fight in my scope. I'll update this review accordingly.
Old dog New trick
Imagination joe
Location: TN
Date:
July 19, 2022
Hopefully this makes the review page stock went on well looks good took some sandpaper smoothed the edges and cut a plastic AK mag and attached to the back of the stock looks right on. Over all satisfied looks cooler and shoots fine.
Recommended
GARBAGE!!!
EZRA
Location: Biloxi Mississippi
Date:
March 8, 2021
THIS STOCK IS CHEAP PLASTIC GARBAGE!
Very Poor Quality
Gun Fun
Location: OR
Date:
October 30, 2020
I cant believe all the good reviews on this stock, I dont want to go on a rant but this thing is flimsy!!! the bolts that go into the mounting block under the feed tube are too long causing them to divot my feed tube there fore the plunger wouldn't go in. I fixed that with a mandrel and then had to alter the entire product to get a proper fit. Its still not 100%. I do have to say though the owner at MSP was great and offered a full refund of the product. I recommend shopping with MSP but in no way recommend this stock to anyone. 100% toy grade!!!!
AWESOME
Oceanside boy
Location: CALIFORNIA
Date:
July 10, 2020
Great product when finished. Only 2 nags. # 1 is the instructions were missing a couple key parts to assembling your new stock. Just make sure to take your time and be a little mechanically inclined. # 2 the iron sights do not adjust and are basically there just for looks so you will need a scope or sights of some kind to add onto the included rail. Overall awesome upgrade and mountsplus was great with customer service and on time shipping!
Verified Buyer
Recommended
GREAT Quality and Fit...instructions need help
Steve
Location: Granbury Texas
Date:
April 3, 2020
Four stars, because I could figure out what was not clear in the instructions. This product will give new life to a very old rifle, because it just sat in the safe with the original stock being in too good of condition to take out into the Texas out-of-doors. Plus the Bullpup design makes the rifle much more versatile.
Verified Buyer
Recommended
Muzzelite bullpup stock for the Marlin 60 tubular fed
Sam Clark
Location: Mation, NC
Date:
January 3, 2020
This is a very nice product and my experience overall was wonderful
Verified Buyer
Recommended
Sturdy but light and well balanced
Jac
Location: Northern California
Date:
December 31, 2019
What a great way to modernize an old tube fed rim fire rifle to a more balanced setup. This stock has a unique feel, it feels like the weight of the rifle is balanced over the grip. The trigger mechanism feels reasonably Stout and does not have any Hang-Ups. When I received the stock it was missing couple parts. I called mounts plus, and the customer service was so great. I received the replacement parts less than 48 hours later with extra parts to spare because they sent the whole new hardware kit. They even sent a follow-up email to make sure I receive the parts and the stock was completed with satisfaction. Thank you for the great customer service and the great product.
Verified Buyer
Recommended
New look for a simple rifle
Nic
Location: Massachusetts
Date:
December 5, 2018
Looks neat but needed custom fitting for my pre 1994 marlin... had to grind some plastic to fit rounded trigger well inside the stock. Trigger is finicky but oil helps a little.
Verified Buyer
Pretty fun
Doug
Location: Utah
Date:
March 31, 2018
I had to do a surprising amount of work on this to get it to fit the gun it was made for they had this wood block painted black that covered an in used hole it was way too thick also had too big of an opening for the action I had to shave off plastic in front of the trigger to get it to work....That said after it was all fitted it was a kick to shoot made the gun well balanced
Verified Buyer
Recommended
Perfect.
GREAT SWORD
Location: Northern California
Date:
October 5, 2017
Perfect fit easy install, Simple clear instructions. gave my old plinker a new life =)
Verified Buyer
Recommended
