My Cart: 0 item(s)
Precision Reflex MSTN QC AR-15 Muzzle Brake 5.56MM (223) black
The QCB has been cut from solid stainless steel bar stock for greater resistance to heat and burnout. Specs: 304 Stainless .95" dia. X 2.05" long. Black Nitrite finish thread is 1/2"-28 The area over the threaded end of the brake tapers down to a .750" diameter. The brake comes with a selection of spacer shims to set the timing of the brake. The 3 holes should be at the 1 O'clock position when tightened into place. Tighten brake into place using a round screw driver in the 1st slot closest to the barrel.
Shipping Weight: 0.215 lbs
AR 15 muzzle brake quick links:
- AR 15 muzzle brake
- Best ar 15 muzzle brake
- Best 5.56 muzzle brake
- AR15 muzzle brake
- Best ar muzzle brake
- Best muzzle brake
- 223 muzzle brake
- 556 Muzzle Brake
- AR 15 compensator
- Best muzzle brake for ar-15
- Best ar 15 muzzle device
- AR muzzle brake
The distinction between inferior quality and premium AR-15 Muzzle Brake is undeniable. At MSP, we only offer AR-15 Accessories from the most trusted brands like Precision Reflex. Buy with confidence that we stand behind the product we sell.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
Customer Ratings & Reviews
Ratings Snapshot
out of 5
5
(1)
4
(0)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
out of 5
5
(1)
4
(0)
3
(0)
2
(0)
1
(0)
Would recommend this product.
100%
1 Total Reviews
- 1
Exceptional AR Muzzle Brake!
JAMIE
Location:
Date:
August 8, 2019
Exceptional Muzzle Brake! The fit and finish were outstanding. No cheap matt blue finish. This is a high-quality AR Brake...you get what you pay for. The added washers (multiple thicknesses) will easily allow the user to "time" the brake. Just wrap a layer or two of masking tape around a round shank screwdriver and place through the side ports to tighten. The ports visible on top in the photo are the only ones on the brake, i.e., there are not small ports on the top left, indicating that this brake is designed to help keep the rifle down and to the left, similar to the AK-47 slant brake. The short of it is this...this brake works awesome! Almost no recoil movement and the noise is not objectionable with basic ear muffs. No need for double protection like some other designs. It's also smaller, in my opinion than it looks in the pictures. It's only slightly larger than an A2 flash hider and looks great on any AR. Worth every penny!
Recommended
1 Total Reviews
- 1
