NcSTAR AK-47 Tri-Rail & Reciever Cover

NcSTAR AK-47 Tri-Rail & Reciever Cover
MSP Code: 111-NCS-MTAK
UPC Code: 814108011918
Price: $19.99

Status: Status: In Stock, ready to ship
Ratings Snapshot
4.4
out of 5
5 (14)
4 (10)
3 (1)
2 (0)
1 (1)
Would recommend this product.
96.2%


NcSTAR AK-47 Tri-Rail & Reciever Cover

  • AK-47 Weaver Style Tri-Rail Mount and Receiver Cover
  • Replaces existing AK-47 receiver cover. Fits AKM pattern rifles with a stamped receiver (7.62X39, 5.54X39, .223)
  • The Mount provides Three Rails for mounting and Optic onto the top rail and accessories on the side rails like a Flashlight and/or Laser
  • The two side rails can be mounted in several positions for mounting flexability, they are also removable
  • Adjustable front tab and two rear set screws are provided for a secure fit
  • Aluminum (Rail) and Steel Construction (Receiver Cover)
  • Length: 9.4"
  • Weight: 11.2 oz
  • NcSTAR Patented design: Patent # D555,751

Customer Ratings & Reviews

26
Ratings Snapshot
4.4
out of 5
5 (14)
4 (10)
3 (1)
2 (0)
1 (1)
Would recommend this product.
96.2%
4.4
out of 5
5 (14)
4 (10)
3 (1)
2 (0)
1 (1)
Would recommend this product.
96.2%
26 Total Reviews
NcSTAR AK-47 Tri-Rail & Reciever Cover
5 out of 5
Location: Spokane WA
Date: May 14, 2011
I did not have to modify my rifle at all to put this on. It is great quality, better than the one my rifle came with. Tri-rail is solid and has the groove down the middle so you can use the iron sight. Excellent product very happy.
Recommended
tri rail cover
4 out of 5
Location: michigan
Date: April 10, 2011
all around very nice piece pieces of metal where therd's are bent to big had to grind down other wise good
Recommended
AK 47 tri-rail Recever cover
5 out of 5
Location: Michigan
Date: March 24, 2011
well built will the little threaded pieces are to thick and curved stop it from fitting until you grind each piece down to fit over edge could use to be smaller or on the outside tack weld I like it a lot good look
Recommended
AK-47 Tri-RailMount ReceivernCover
4 out of 5
Location: Las Vegas
Date: February 26, 2011
fit pertfectly but may need to do a little filing for some variant models . In my case didn't have to do any filing . Excellent product MS i will order again from you probably the AK furnioture. ( butt stock, pistol grip , and fore hand. Thanks MS!
Recommended
NcSTAR AK-47 Tri-Rail & Reciever Cover
4 out of 5
Location: New England
Date: November 27, 2010
On my weapon I needed to remove some metal from each side of the cover to clear the bolt/screw heads. I also needed to SLIGHTLY bend the lower rear lip to clear the lugs on the rear of the receiver. Total time about 15 minutes using a round file and a pair of vise grip pliers. The 2 allen bolts lock the cover in place for a nice solid mount for the scope. I have not had it out to the range yet to see if the scope will retain it's zero.
Recommended
NcSTAR AK-47 Tri-Rail
4 out of 5
Location: Senoia, GA
Date: August 11, 2010
This product works great, although you may need a dremel tool and a flat file to make it fit, depending on your AK...be patient and go slow and you will be impressed!!!
Recommended
26 Total Reviews
You May Also Like
Mounting Solutions Plus ©2016 All Rights Reserved 305-253-8393 $$
10655 S.W. 185 Terrace Miami FL 33157