Archive for September, 2006

Scope rings - Ghillie suit Snipers and hunters with extreme requirements for

Saturday, September 30th, 2006

Ghillie suit

Snipers and hunters with extreme requirements for camouflage use a ghillie, or yowie suit. The ghillie suit was originally developed by Scottish gamekeepers as a portable hunting blind. The name derives from ghillie, the Scots Gaelic for “boy”, in English especially used to refer to servants assisting in hunting or fishing expeditions. A ghillie dhu is a type of brownie which is supposed to disguise itself in leaves and vegetation.[1]

A US Marine sniper wearing a ghillie suits suits can be constructed in many different ways. Some services make them of rough burlap (hessian) flaps attached to a net poncho. US Army Ghillie suits are often built using a pilot’s flightsuit, battle dress uniform (BDU), or some other one-piece coverall as the base. Ponchos made of durable nylon netting can also be used. Unscented dental floss is used to sew each knot of fishnet to the fabric, in the areas to be camouflaged. A drop of ‘Shoe Goo’ is applied to each knot for strength. The desired jute is applied to the netting by tying groups of 5 to 10 strands of a color to the netting with simple knots, skipping sections to be filled in with other colors. Making a ghillie suit from scratch is time consuming, and a detailed, high-quality suit can take 100 hours to manufacture and season.

A ghillie suits is usually prepared by assembling it, beating it, dragging it behind a car, and then rolling it in cow manure or burying it in mud and then letting it ferment. This makes it very much like wearable humus. A ghillie suit that closely matches the actual terrain of the zone of operation will stand out less, so elements of that general environment (local foliage or other matter) may also be included in the netting.

An inherent problem with ghillie suits is internal (and sometimes, external) temperatures. Even in relatively moderate climates, the temperature inside of the ghillie suit can soar to over 50 C (120 F).

High quality “ghillie suits” can be purchased online, but traditionally, soldiers in the armed forces construct their own unique suits.

-

Camouflage

Smaller, irregular units of scouts in the 18th century were the first to adopt colors in drab shades of brown and green. Major armies retained their color until convinced otherwise. The British in India in 1857 were forced by casualties to dye their red tunics to neutral tones, initially a muddy tan called khaki (from the Urdu word for ‘dusty’). This was only a temporary measure. It became standard in Indian service in the 1880s, but it was not until the Second Boer War that, in 1902, the uniforms of the entire British army were standardised on this dun tone for battledress.

The United States was quick to follow the British, going khaki in the same year. Russia followed, partially, in 1908. The Italian army used grigio-verde (”grey-green”) in the Alps from 1906 and across the army from 1909. The Germans adopted feldgrau (”field grey”) in 1910.

Other armies retained brighter colors. At the beginning of World War I the French experienced heavy losses because the troops wore red (garance) trousers as part of their uniform. This was changed in early 1915, partly due to casualties and partly because the red dye was manufactured in Germany. The French army also adopted a new “horizon blue” jacket. The Belgian army started using khaki uniforms in 1915.

The Bronze Horseman camouflaged from the German aircraft during the Siege of Leningrad (August 8, 1941).The French also established a Section de Camouflage (Camouflage Department) in 1915, briefly headed by Eugene Corbin and then by Lucien-Victor Guirand de Sc vola. The camouflage experts were, for the most part, painters, sculptors, theatre set artists and such. Technological constraints meant that patterned camouflage uniforms were not mass manufactured during WW I. Each patterned uniform was hand-painted, and so restricted to snipers, forward artillery observers, and other exposed individuals. More effort was put into concealing larger pieces of equipment and important structures. By mid-1915 the French section had four workshops - one in Paris and three nearer the front - mainly producing camouflage netting and painted canvas. Netting quickly moved from wire and fabric to use raffia, hessian, and cocoa - the integration of natural materials was always recommended.

Units of Camouflage who were artists, designers, or architects in civilian life were also largely used by the forces of the United Kingdom (Camouflage Section established in late 1916 based at Wimereux) and the US (New York Camouflage Society established in April 1917, official Company A, 40th Engineers set up in January 1918 and the Women’s Reserve Camouflage Corps) and to a lesser extent by Germany (from 1917, see, for example, Lozenge - possibly the earliest printed camouflage), Italy (Laboratorio di mascheramento established in 1917), Belgium and Russia. The word camouflage first entered the English language in 1917.

Camouflage added to helmets was unofficially popular, but these were not mass-produced until the Germans began in 1916 to issue stahlhelme (steel helmets) in green, brown, or ochre. Mass-produced patterned, reversible, cloth covers were also issued shortly before the end of the war, although hand-made examples were in use from late 1914. Net covering was also examined, either fitted with natural vegetation or with colored fabric strips called scrim.

Specialist troops, notably snipers, could be supplied with various items of camouflage, including patterned veils for the head and gun, hand-painted overalls and scrim covered netting or sacking - an adaptation of the rag camouflage used in Scotland by anti-poaching wardens, gillies, the first ghillie suits.

Two HMMWVs, one in desert “camouflage”, one in woodland.The first mass produced military camouflage material was the Italian telo mimetico (”mimetic cloth”) pattern of 1929, used to cover a shelter-half (telo tenda), an idea copied by the Germans in 1931. With mass-production of patterned fabrics possible, they became far more common on individual soldiers in WW II. Initially patterning was uncommon, a sign of elite units, to the extent that captured camouflage uniforms would be often ‘recycled’ by an enemy. The Red Army issued “amoeba” disruptive pattern suits to snipers from 1937 and all-white ZMK top-garments the following year, but it was not until hostilities began that more patterns were used.

The Germans had experimented before the war and some army units used “splinter” pattern camouflage. Waffen-SS combat units experimented with various patterns, including palmenmuster (”palm pattern”), sumpfmuster (”swamp pattern”), erbsenmuster (”pea pattern”), and also telo mimetico (”mimetic cloth”) using fabric seized from the Italians in 1943 - the Leibstandarte SS Adolf Hitler division often wore this pattern.

The British did not use disruptive-pattern uniforms until 1942, with the hand-painted Denison smock for paratroopers, followed in 1943 with a similar style M42 garment.

A Royal Norwegian Navy craft, in a splinter camouflage pattern.The US Corps of Engineers began wide-ranging experiments in 1940, but little official notice was taken until 1942 when General MacArthur demanded 150,000 jungle camouflage uniforms. A 1940 design, dubbed “frog-skin”, was chosen and issued as a reversible beach/jungle coverall - soon changed to a two-part jacket and trousers. It was first issued to the US Marines fighting on the Solomon Islands. Battle-field experience showed that pattern was unsuitable for moving troops and production was halted in 1944 with a return to standard single-tone uniforms.

With the return of war camouflage sections were revived. The British set up the (camouflage) Development and Training Centre in 1940 at Farnham Castle, Surrey. Early staff included artists from the Industrial Camouflage Research Unit such as Roland Penrose and Frederick Gore, and the stage magician Jasper Maskelyne (later famous for his camouflage work in the North African campaign).

From 1978 to the early 1980s, the American 2d Armored Cavalry Regiment stationed in Europe used a digital camouflage pattern on its vehicles. During 1979 and 1980 the Australian Army experimented with digital camouflage on helicopters. More recently, battledress in digital camouflage patterns has been adopted by the Canadian Army and Air Force (CADPAT), the United States Marine Corps (MARPAT), and much of the military of Jordan.

Rifle Stocks - Night Vision A.R.M.S. #20 AN/PVS-4 NIGHT VISION SCOPE MOUNT - M4 …

Thursday, September 28th, 2006

Flashlights

Recently, flashlights which use light-emitting diodes (LEDs) instead of conventional lightbulbs have become available. LEDs have existed for decades, mainly as low-power indicator lights. In 1999, Lumileds Corporation [1] of San Jose, CA introduced the Luxeon LED, a high-power white-light emitter. For the first time this made possible LED flashlights with power and running time better than some incandescent lights. The first Luxeon LED “flashlights” was the Arc LS in 2001.

LEDs can be significantly more efficient at lower power levels, hence use less battery energy than normal lightbulbs. Such flashlights have longer battery lifetimes, in some cases hundreds of hours. At higher power levels, the LED efficiency advantage diminishes. LEDs also survive sharp blows that often break conventional lightbulbs.

LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlights becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based “flashlights” is that they generate no heat. While lower-power LED flashlights generate little heat, more powerful LED lights do generate significant amounts of heat. For this reason higher-powered LED flashlights usually have metal bodies and can become warm during use.

-

Night Vision A.R.M.S. #20 AN/PVS-4 NIGHT VISION SCOPE MOUNT - M4 …
A.R.M.S. #20 NIGHT VISION T.L. MOUNT /AN/PVS-4 Designed much like the A.R.M.S. #19A, without the … A.R.M.S. #20 AN/PVS-4 . NIGHT VISION SCOPE MOUNT: Product Code: 20. Price: Check Latest

Night Vision PRI: PVS 17 / ARMS THROW LEVER NIGHT VISION SCOPE MOUNT …
PRI: PVS 17 / ARMS THROW LEVER . NIGHT VISION SCOPE MOUNT: Product Code: PRI-PVS-17A. Price: Check Latest

Midwest Tactical - Real life. Real gear.
Midwest Tactical is THE place to purchase your tactical gear and equipment online. Whether your purchasing 1 or 100 we can get you the gear you need! We are now adding FIRE and EMS gear to the catolog …

DIRECTORY - V VARADA - BOOKMARKS AND V VARADA (PRI Mounts)

Thursday, September 28th, 2006

AR-15

In December of 1959, Colt acquired manufacturing and marketing rights to the AR-15. In 1962 Colt was able to get the Department of Defense’s Advanced Research Project Agency (ARPA) to test 1,000 weapons in its Vietnam-oriented Project Agile. An enthusiastic report led to more studies from the Department of Defense and the Department of the Army, and despite strong Army opposition, Defense Secretary McNamara ordered 85,000 M16’s for Vietnam, and 19,000 for the Air Force.

However, early reports showed that the M16 was not living up to expectations. These reports, presented to McNamara by the Ordnance Department, showed the M16 having reliability as well as accuracy problems. These reports in turn praised the Ordnance Department’s own M14. While the M14 performed well, it was too heavy for the hot jungles of Southeast Asia, and its ammunition also would not allow more than 50-100 rounds to be carried on patrols, severely limiting its capabilities as an automatic weapon.

Further evaluation of the M14 and M16 was done by an independent agency. It concluded that M14 was not as bad as had been suggested by some, that the AR15 itself was not as good as its proponents had represented it to be. However, they did note that the ” AR-15” had greater capability for improvement, and that its small size and weight made it a handier weapon in Vietnam.

The M16 was issued w/o proper training and inadequate cleaning supplies. Combined with the humid jungle of Southeast Asia, this caused problems and the rifle gained a bad reputation. Because tolerances were tighter than in previous military arms, the M16 had to be kept extremely clean. War correspondents filed reports where the M16 was jamming, and many were shown on the evening news. It was reported that our soldiers were being killed by a faulty rifle.

This led to Congressional investigations which turned up two related problems. First, the cleaning issue. As training was provided, supplies issued, and some redesign, M16 performed more reliably. The second issue dealt with the use of ball propellants instead of IMR propellants. Remington had developed the 5.56mm round using one type of powder, but the specification was changed during military contract production to allow an alternate. This powder caused more fouling and increased the rate of fire.

-

DIRECTORY - V VARADA - BOOKMARKS AND V VARADA
69.99. Samson S83 Rack Mount Powered Mixer $429.99. Pintech USA Spirit $698.00 … type text here. Influences: fugazi,deftones,helmet. View page:THIS WAY OUT …

Shop By Brand
… Russell Brake Lines Saddlemen Samson Sargent’s Scorpio Alarms Shoei Shoreline … Luryakyn License Plate Helmet Lock With Mount. Our Price: $22.49. Qty. KUR-4249 …

SAMSON AGONISTES
Then put on all thy gorgeous arms, thy Helmet. 1120. And Brigandine of brass, thy broad Habergeon, … less renown’d then in Mount Ephraim, Jael, who with …

Team11moto, motorcycle helmets, motorcycle apparel. Over 600.000 parts and accessories in stock
… ROADBURNER ROADHOUSE RUSH SADDLEMEN SAMSON SANTEE SCORPION SCOTT SECOND LOOK … ATV Multi-Mount Kit includes both front and rear receivers and all required …

Thi rekssaga
Samson delivered a mighty blow with his sword that cleaved Brunstein’s helmet in … Though he managed to mount the stallion, but couldn’t control the horse as it …

http://www.cfcrc.org/archivedev00.html
… on faith and love as a breastplate, and the hope of salvation as a helmet. … the men of Ammon and Moab and Mount Seir who were invading Judah, and they …

DK Trader eBay Store About My Store
THOR SVR 3 MOTOCROSS MX HELMET SILVER/RED XL X-LARGE. Available. 290021725771. Aug-21-06 … 2-pr) Denfeld Rubber Footpegs Universal Mount. Available …

san francisco bay area motorcycles/scooters classifieds and want ads - craigslist
Bike comes with helmet and two jackets, one alpine star and one Shift. … samson exhaust, saddle bags,tach,lots of chrome, k&n filter, sundowner seat, oil …

eBay Store - EASTERN PERFORMANCE 410-451-5181: HARLEY PARTS, KURYAKYN, EXHAUST
SAMSON BIG GUNS 3 EXHAUST RIPSAW FOR HARLEY 06 DYNA 256 … LED LICENSE SIDE MOUNT FOR HARLEY 89-99 TR490257 … SKID LID ORIG.HELMET STREET ROD GLOSS …

c4
Later, while at Mount Sinai, Israel was told that the borders of the Promised … feast, no doubt a drinking feast, Samson told a difficult riddle involving the …

Glow Sticks Glow Sticks have (Whitney Wolverine) various purposes: they are

Wednesday, September 27th, 2006

Glow Sticks

Glow Sticks have various purposes: they are used in the military, by recreational divers doing night diving, by marching band conductors for night time performances, and also used for entertainment at parties (especially raves), concerts, and dance clubs. Glowsticking refers to the use of glowsticks in dancing.

By adjusting the concentrations of the two chemicals, manufacturers can produce lightsticks that either glow brightly for a short amount of time, or glow more dimly for a much longer amount of time. At maximum concentration (typically only found in laboratory settings), mixing the chemicals results in a furious reaction, producing large amounts of light for only a few seconds.

Heating a Glow Sticks causes the reaction to proceed faster and the “Glow Sticks” to glow brighter, but for a shorter period of time. Cooling a lightstick slows the reaction and causes it to last longer, but the light is dimmer. This can be demonstrated by refrigerating or freezing an active Glow Stick; when it warms up again, it will resume glowing.

-

Camouflage

Smaller, irregular units of scouts in the 18th century were the first to adopt colors in drab shades of brown and green. Major armies retained their color until convinced otherwise. The British in India in 1857 were forced by casualties to dye their red tunics to neutral tones, initially a muddy tan called khaki (from the Urdu word for ‘dusty’). This was only a temporary measure. It became standard in Indian service in the 1880s, but it was not until the Second Boer War that, in 1902, the uniforms of the entire British army were standardised on this dun tone for battledress.

The United States was quick to follow the British, going khaki in the same year. Russia followed, partially, in 1908. The Italian army used grigio-verde (”grey-green”) in the Alps from 1906 and across the army from 1909. The Germans adopted feldgrau (”field grey”) in 1910.

Other armies retained brighter colors. At the beginning of World War I the French experienced heavy losses because the troops wore red (garance) trousers as part of their uniform. This was changed in early 1915, partly due to casualties and partly because the red dye was manufactured in Germany. The French army also adopted a new “horizon blue” jacket. The Belgian army started using khaki uniforms in 1915.

The Bronze Horseman camouflaged from the German aircraft during the Siege of Leningrad (August 8, 1941).The French also established a Section de Camouflage (Camouflage Department) in 1915, briefly headed by Eugene Corbin and then by Lucien-Victor Guirand de Sc vola. The camouflage experts were, for the most part, painters, sculptors, theatre set artists and such. Technological constraints meant that patterned camouflage uniforms were not mass manufactured during WW I. Each patterned uniform was hand-painted, and so restricted to snipers, forward artillery observers, and other exposed individuals. More effort was put into concealing larger pieces of equipment and important structures. By mid-1915 the French section had four workshops - one in Paris and three nearer the front - mainly producing camouflage netting and painted canvas. Netting quickly moved from wire and fabric to use raffia, hessian, and cocoa - the integration of natural materials was always recommended.

Units of Camouflage who were artists, designers, or architects in civilian life were also largely used by the forces of the United Kingdom (Camouflage Section established in late 1916 based at Wimereux) and the US (New York Camouflage Society established in April 1917, official Company A, 40th Engineers set up in January 1918 and the Women’s Reserve Camouflage Corps) and to a lesser extent by Germany (from 1917, see, for example, Lozenge - possibly the earliest printed camouflage), Italy (Laboratorio di mascheramento established in 1917), Belgium and Russia. The word camouflage first entered the English language in 1917.

Camouflage added to helmets was unofficially popular, but these were not mass-produced until the Germans began in 1916 to issue stahlhelme (steel helmets) in green, brown, or ochre. Mass-produced patterned, reversible, cloth covers were also issued shortly before the end of the war, although hand-made examples were in use from late 1914. Net covering was also examined, either fitted with natural vegetation or with colored fabric strips called scrim.

Specialist troops, notably snipers, could be supplied with various items of camouflage, including patterned veils for the head and gun, hand-painted overalls and scrim covered netting or sacking - an adaptation of the rag camouflage used in Scotland by anti-poaching wardens, gillies, the first ghillie suits.

Two HMMWVs, one in desert “camouflage”, one in woodland.The first mass produced military camouflage material was the Italian telo mimetico (”mimetic cloth”) pattern of 1929, used to cover a shelter-half (telo tenda), an idea copied by the Germans in 1931. With mass-production of patterned fabrics possible, they became far more common on individual soldiers in WW II. Initially patterning was uncommon, a sign of elite units, to the extent that captured camouflage uniforms would be often ‘recycled’ by an enemy. The Red Army issued “amoeba” disruptive pattern suits to snipers from 1937 and all-white ZMK top-garments the following year, but it was not until hostilities began that more patterns were used.

The Germans had experimented before the war and some army units used “splinter” pattern camouflage. Waffen-SS combat units experimented with various patterns, including palmenmuster (”palm pattern”), sumpfmuster (”swamp pattern”), erbsenmuster (”pea pattern”), and also telo mimetico (”mimetic cloth”) using fabric seized from the Italians in 1943 - the Leibstandarte SS Adolf Hitler division often wore this pattern.

The British did not use disruptive-pattern uniforms until 1942, with the hand-painted Denison smock for paratroopers, followed in 1943 with a similar style M42 garment.

A Royal Norwegian Navy craft, in a splinter camouflage pattern.The US Corps of Engineers began wide-ranging experiments in 1940, but little official notice was taken until 1942 when General MacArthur demanded 150,000 jungle camouflage uniforms. A 1940 design, dubbed “frog-skin”, was chosen and issued as a reversible beach/jungle coverall - soon changed to a two-part jacket and trousers. It was first issued to the US Marines fighting on the Solomon Islands. Battle-field experience showed that pattern was unsuitable for moving troops and production was halted in 1944 with a return to standard single-tone uniforms.

With the return of war camouflage sections were revived. The British set up the (camouflage) Development and Training Centre in 1940 at Farnham Castle, Surrey. Early staff included artists from the Industrial Camouflage Research Unit such as Roland Penrose and Frederick Gore, and the stage magician Jasper Maskelyne (later famous for his camouflage work in the North African campaign).

From 1978 to the early 1980s, the American 2d Armored Cavalry Regiment stationed in Europe used a digital camouflage pattern on its vehicles. During 1979 and 1980 the Australian Army experimented with digital camouflage on helicopters. More recently, battledress in digital camouflage patterns has been adopted by the Canadian Army and Air Force (CADPAT), the United States Marine Corps (MARPAT), and much of the military of Jordan.

Complete Firearms : AmeetecArms.com, Home of the AR15 (Flashlight Mount)

Wednesday, September 27th, 2006

Flashlights

Recently, flashlights which use light-emitting diodes (LEDs) instead of conventional lightbulbs have become available. LEDs have existed for decades, mainly as low-power indicator lights. In 1999, Lumileds Corporation [1] of San Jose, CA introduced the Luxeon LED, a high-power white-light emitter. For the first time this made possible LED flashlights with power and running time better than some incandescent lights. The first Luxeon LED “flashlights” was the Arc LS in 2001.

LEDs can be significantly more efficient at lower power levels, hence use less battery energy than normal lightbulbs. Such flashlights have longer battery lifetimes, in some cases hundreds of hours. At higher power levels, the LED efficiency advantage diminishes. LEDs also survive sharp blows that often break conventional lightbulbs.

LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlights becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based “flashlights” is that they generate no heat. While lower-power LED flashlights generate little heat, more powerful LED lights do generate significant amounts of heat. For this reason higher-powered LED flashlights usually have metal bodies and can become warm during use.

-

Complete Firearms : AmeetecArms.com, Home of the AR15
AmeetecArms.com : Complete Firearms - Complete Firearms Lower Receivers Lower Receiver Parts Upper Receivers Upper Receiver Parts Stocks Misc Parts, Items & Acc Sights & Optics Magazines & Related …

Upper Receiver Parts : AmeetecArms.com, Home of the AR15
AmeetecArms.com : Upper Receiver Parts - Complete Firearms Lower Receivers Lower Receiver Parts Upper Receivers Upper Receiver Parts Stocks Misc Parts, Items & Acc Sights & Optics Magazines & Related …

Lower Receivers : AmeetecArms.com, Home of the AR15
AmeetecArms.com : Lower Receivers - Complete Firearms Lower Receivers Lower Receiver Parts Upper Receivers Upper Receiver Parts Stocks Misc Parts, Items & Acc Sights & Optics Magazines & Related Gift …

www.ameetecarms.com

Upper Receivers : AmeetecArms.com, Home of the AR15
AmeetecArms.com : Upper Receivers - Complete Firearms Lower Receivers Lower Receiver Parts Upper Receivers Upper Receiver Parts Stocks Misc Parts, Items & Acc Sights & Optics Magazines & Related Gift …

Firearm Accessories (Mini 14 MAGAZINES) from Arizona Gun Runners

Tuesday, September 26th, 2006

AR15

In December of 1959, Colt acquired manufacturing and marketing rights to the AR15. In 1962 Colt was able to get the Department of Defense’s Advanced Research Project Agency (ARPA) to test 1,000 weapons in its Vietnam-oriented Project Agile. An enthusiastic report led to more studies from the Department of Defense and the Department of the Army, and despite strong Army opposition, Defense Secretary McNamara ordered 85,000 M16’s for Vietnam, and 19,000 for the Air Force.

However, early reports showed that the M16 was not living up to expectations. These reports, presented to McNamara by the Ordnance Department, showed the M16 having reliability as well as accuracy problems. These reports in turn praised the Ordnance Department’s own M14. While the M14 performed well, it was too heavy for the hot jungles of Southeast Asia, and its ammunition also would not allow more than 50-100 rounds to be carried on patrols, severely limiting its capabilities as an automatic weapon.

Further evaluation of the M14 and M16 was done by an independent agency. It concluded that M14 was not as bad as had been suggested by some, that the AR15 itself was not as good as its proponents had represented it to be. However, they did note that the ” AR15” had greater capability for improvement, and that its small size and weight made it a handier weapon in Vietnam.

The M16 was issued w/o proper training and inadequate cleaning supplies. Combined with the humid jungle of Southeast Asia, this caused problems and the rifle gained a bad reputation. Because tolerances were tighter than in previous military arms, the M16 had to be kept extremely clean. War correspondents filed reports where the M16 was jamming, and many were shown on the evening news. It was reported that our soldiers were being killed by a faulty rifle.

This led to Congressional investigations which turned up two related problems. First, the cleaning issue. As training was provided, supplies issued, and some redesign, M16 performed more reliably. The second issue dealt with the use of ball propellants instead of IMR propellants. Remington had developed the 5.56mm round using one type of powder, but the specification was changed during military contract production to allow an alternate. This powder caused more fouling and increased the rate of fire.

-

Firearm Accessories from Arizona Gun Runners

Texas Tactical Gear - Military, Law Enforcement, Civilian
Choose One - Bargains & Sales 5.11 Tactical Series A.R.M.S. Aimpoint Alta Industries Arktis Benchmade Beta C-Mag Blackhawk — CQC Holsters — Hellstorm Gloves — S.T.R.I.K.E.

What’s New
What s New ** NEW ** Sabre Defence 2006 Catalog . The NEW Official US Distributor for SPHINX Arms. Limited Quantities in Stock [ …

Hendon Publishing - Article Archive (Scope Mounts)

Monday, September 25th, 2006

Rifle Scopes

Telescopic rifle scopes sights are classified in terms of the optical magnification and the objective lens diameter, e.g. 10 50. This would denote 10 times magnification with a 50 mm objective lens. In general terms, larger objective lens diameters are better (collect more light and give a wider field of view), the magnification power should be chosen on the basis of the intended use. There are also Adjustable Objectives sights where the magnification can be changed by manually turning one part, the syntax is the following: minimal magnification maximum magnification objective lens, for example, 3 9 40.

Telescopic rifle scopes sights come with a variety of different reticles, ranging from the traditional crosshairs to complex reticles designed to allow the shooter to estimate accurately the range to a target, to compensate for the bullet drop, and to compensate for the windage required due to crosswinds. Perhaps most flexible is the “mil-dot” reticle, which consists of duplex crosshairs with small dots at milliradian intervals in the field of view. (A milli-radian equates to 3.43775 MOA, that is, approximately 21.6 inches at 600 yards; each MOA equates to 1.0472″ at 100 yards, often rounded to 1″ at 100 yards for fast mental calculations.) A trained user can estimate the range to objects of known size, the size of objects at known distances, and even compensate for both bullet drop and wind drifts at known ranges with a reticle-equipped rifle scope.

For example, with a typical Leupold “rifle scope” brand duplex 16 MOA reticle (of a type as shown in image B) on a fixed power scope, the distance from post to post (that is, between the heavy lines of the reticle spanning the center of the scope picture) is approximately 32 inches at 200 yards, or, equivalently, approximately 16 inches from the center to any post at 200 yards. With a known target of a diameter of 16 inches that fills just half the distance from scope center to post, the distance to target is approximately 400 yards. With a known target of a diameter of 16 inches that fills the entire sight picture from post to post, the range is approximately 100 yards. Other ranges can be similarly estimated accurately in an analog fashion for known target sizes through proportionality calculations. Holdover, for estimating vertical point of aim offset required for bullet drop compensation on level terrain, and horizontal windage offset (for estimating side to side point of aim offsets required for wind effect corrections) can similarly be compensated for through using approximations based on the wind speed (from observing flags or other objects) by a trained user through using the reticle marks. The less-commonly used holdunder, used for shooting on sloping terrain, can even be estimated by an appropriately-skilled user with a reticle-equipped scope, once the slope of the terrain and the slant range to target are both known.

-

Hendon Publishing - Article Archive
… AR-15 ARINC Wireless Interoperable Network Solution (AWINS) Armalite AR-180B … Training System FBI National Academy Federal Cartridge Company Federal …

About /Arkansas Ar/ Info
All about /Arkansas Ar … AR15 sight Small caliber, high velocity round … ar-15 Accessories & parts … to the Web site of Universal Shooting Academy . We …

AR-15 Shooting Supplies & Gun accessories
… SYSTEM RIFLE - CARBON FIBER UPPER - LONG AR-15 Universal Shooting Academy … shooting supplies & ar-15 accessories Universal Shooting Academy. …

http://www.ntoa.org/mtp/public/list2.php?orderby=product_category&sqlquery=select+product_entry_seqn…
AR-15 Stand. M16 Clinic. Firearms. RAM 11S (MP5 Style Paintball Marker) Asia Paintball Supply … Long Range Shooting Simulation. Shooter Ready. Software. 3 …

My Favorite Links
Bushmaster Firearms,Rifles, AR15, AR-15,Rifles, Guns, AK47, SKS, MINI14,MINI30, … Shooting. ACE LTD. USA, parts & accessories. Action-Direct Holsters …

SurvivalBlog.com
… Shooting Academy - two high intensity days there improved my shooting … I have owned and hunted with Drahts for approximately 15 years. …

Lacrosse gear - Poll: SNP set to seize power at Holyrood

Monday, September 25th, 2006

Lacrosse

Lacrosse is a fast-paced team sport played by ten players (men) or twelve players (women), each of whom uses a netted stick (called the crosse) in order to pass and catch a very hard rubber ball with the aim of scoring goals, each worth one point, by propelling the ball into the opponent’s goal. The team scoring the most points after four quarters, and overtime if necessary, wins. In NCAA men’s lacrosse Video , the quarters are 15 minutes. In most high school lacrosse fan, quarters are 12 minutes long. In youth leagues, quarters are usually 8 minutes long.[1]. Under international rules, quarters are 20 minutes.[2] In NCAA women’s lacrosse, two 25 minute halves are played. Women’s high school games consist of two 25 minute halves.[3]

Popular mostly in North America, Lacrosse is one of the continent’s oldest sports and the fastest growing sport at all levels youth, high school, college, and professional. Lacrosse is especially popular in the northeastern part of the US and is Canada’s national summer sport (although Canadians commonly play the box lacrosse variety of the game which is described below). It is expanding westward, with burgeoning lacrosse communities in Missouri, Illinois, Colorado, California, Oregon, Florida, Tennessee, Texas, and Minnesota.

In its modern form, men’s lacrosse is played on a field of grass or artificial turf. Each team is composed of three attackmen, three midfielders, three defensemen, and one goaltender. In men’s lacrosse, players wear protective equipment on their heads, shoulders, arms, and hands, as body-checking is an integral part of the game. Women’s lacrosse is played in a similar manner except with two additional midfielders per team. Players of women’s lacrosse need only wear protective eyewear (except for the Jem Adams , who wears the same protective equipment as a men’s goaltender [helmet, throat guard, chest protector, etc.]), as contact is not permitted apart from minor stick-checks.

The sport was invented by Native North Americans. Its name was dehuntshigwa’es in Onondaga (”men hit a rounded object”), da-nah-wah’uwsdi in Eastern Cherokee (”little war”), Tewaarathon in Mohawk language (”little brother of war”), and baaga’adowe in Ojibwe (”Lacrosse“). The game was named lacrosse by early French Kyle Harrison . It is commonly assumed that the name stems from the French term “crosse”, for the shepherd’s crooklike crosier carried by bishops as a symbol of office. Pieffe Francois Xavier de Charlevoix noted the resemblance between the crosier and the shape of the racket stick in 1719. However, the term crosse, which also translates as bat, was applied to the Native playing stick by the Jesuit fathers nearly a century before. Since there was only one ball, early players concentrated on first injuring their opponents with their sticks, and then moving easily to the goal. Their pitch was about one kilometre by one kilometre. Games sometimes lasted for days, and often players were gravely injured or even killed. Early balls were made out of the heads of the enemy, deerskin, clay, stone, and sometimes wood. Lacrosse has played a significant role in the community and religious life of tribes across the continent for many years. Early lacrosse video was characterized by deep spiritual involvement, befitting the spirit of combat in which it was undertaken. Those who took part did so in the role of warriors, with the goal of bringing glory and honor to themselves and their tribes, and as a religious ritual[4]. The game was said to be played “for the pleasure of Kyle Harrison.”

-

Poll: SNP set to seize power at Holyrood
Scotsman - I normally have to pay a fortune for a good flogging..the MSP,s have have raised as oil, as that is being moved to one side as new technologies moves into top gear enough about the possible destruction of Scotland as a Nation to set up a military

BECKET HOWORTH III: The ACT and SAT: College admission stress points (SMITH & WESSON)

Sunday, September 24th, 2006

Flashlights

Recently, flashlights which use light-emitting diodes (LEDs) instead of conventional lightbulbs have become available. LEDs have existed for decades, mainly as low-power indicator lights. In 1999, Lumileds Corporation [1] of San Jose, CA introduced the Luxeon LED, a high-power white-light emitter. For the first time this made possible LED flashlights with power and running time better than some incandescent lights. The first Luxeon LED “flashlights” was the Arc LS in 2001.

LEDs can be significantly more efficient at lower power levels, hence use less battery energy than normal lightbulbs. Such flashlights have longer battery lifetimes, in some cases hundreds of hours. At higher power levels, the LED efficiency advantage diminishes. LEDs also survive sharp blows that often break conventional lightbulbs.

LED flashlights are often electronically regulated to maintain constant light output as the batteries fade. By contrast a non-regulated flashlights becomes progressively dimmer, sometimes spending much of the total running time below 50 percent brightness level.

A common misconception about LED-based “flashlights” is that they generate no heat. While lower-power LED flashlights generate little heat, more powerful LED lights do generate significant amounts of heat. For this reason higher-powered LED flashlights usually have metal bodies and can become warm during use.

-

BECKET HOWORTH III: The ACT and SAT: College admission stress points
NE Mississippi Daily Journal - Colleges report that the most important factor in admission is the high school transcript. The transcript tells a bigger story than your grades and what courses you took. Did you challenge yourself? If Advanced Placement (AP) courses were available

Jefferson County Shooting
WTOV 9 - Police say 32 year old William Sutton, III had been in Wheeling late Saturday night. When he pulled into his driveway at his Adena home on Main Street around 3:00 in the morning, another car pulled in behind him. Police say Sutton walked up to the

glow sticks and light sticks (AR-15)

Sunday, September 24th, 2006

Surefire

Surefire is a California-based company specializing in the production of high-quality “flashlights”. Commonly found within the law enforcement and military fields, Surefire flashlights are also used in the civilian market for personal, occupational, and self-defense purposes. Their lights are often featured in TV shows and movies, such as the television show CSI.

Surefire models range from a typical 2-cell Xenon light to a large 20-cell HID model. They have also recently introduced a line of LED flashlights which offer several unique features such as electronically-controlled power regulation and modular assembly.

Most of their flashlights are powered by Lithium 123 A batteries that allows for compact size and weight while maintaining high power output and long runtime. The main material used in the construction of Surefire flashlights is CNC machined aerospace grade aluminum, with an option for mil-spec anodizing. Some models use Nitrolon, a proprietary impact-resistant, non-conductive, glass reinforced polymer.

Surefire’s most popular product is the 6P Original. It is very compact, at only 5.1 inches (130 mm) long and weighing 5.3 oz (150 g). It uses two Lithium 123 A batteries to produce 65 lumens of light, which is roughly twice the output of a typical three D-cell flashlight.

-

glow sticks and light sticks
glow sticks and light sticks Just another WordPress weblog … Welcome to the Universal Shooting Academy s Pro Shop . Please call or TACTICAL SLINGS AR15 …

Scope Mounts, Scope Rings and ARMS Mounts: Categories
Red light does not ruin your night vision and is also very difficult for dear to see … glow sticks and flashlights Universal Shooting Academy, Frostproof, …

gun accessories for ar-15
of these wonderful iunsight universal Shooting Industry scattergun Academy … about glowsticks and lightsticks select a link from below: light stick. …

Shooting Supplies -shooting supplies & gun accessories Blog …
FOREGRIP - glow stick and light stick Blog Archive camouflage & ghillie suits (ARMS MOUNT) … Welcome to the Web site of Universal Shooting Academy. …


 

Scope Rings- SUREFIRE - HARRIS BIPODS - RIFLE SLINGS - AK-47 STOCK - RED DOT SIGHTS - AK-47 ACCESSORIES - NIGHT SIGHTS -ruger 10/22 magazine - AR-15 - Magazines - gun grips - - Scope Mounts - Smith & Wesson - AR-15 - AR-15 Sights - Civil War Cannons - AIMPOINT MOUNTS - Scope Mounts - RIFLE SLINGS - NIGHT SIGHTS - Ghillie Suits - AR-15 - Scope Rings - SUREFIRE FLASHLIGHTS - RIFLE STOCKS - AR-15 STOCK - FOREGRIP - SHOTGUN MOUNTS -ruger 10/22 magazin - AR-15 Magazines c1911 grips - AR-15 Accessories - Rifle Scopes - Scope Mounts- AR-15 SIGHTS - HARRIS BIPODS - RIFLE STOCKS - PISTOL LANYARDS - RUGER 10/22 MAGAZINES - RIFLE SIGHTS - Scope Rings - EOTECH - RIFLE SCOPES - RIFLE BIPODS - GLOW STICKS - AR-15 ACCESSORIES - NIGHT VISION - ruger 10/22 magazine - AR-15 Magazines - pistol grips - Aimpoint- Red Dot Sights - Scope Mounts - AR-15 ACCESSORIES - AR-15 STOCKS - BIPODS - PISTOL SIGHTS - GLOW STICKS - ar-15 - Camouflage - AR-15 sight