Trijicon AccuPoint TR20-2G: 3-9x40 Riflescope, Mil-Dot Crosshair with Green Dot & Free Anti-CANT Device
The Trijicon AccuPoint features advanced fiber optics and several intelligent features that make this scope the right choice for all light conditions and even the harshest environments. All models in the AccuPoint Series operate battery free eliminating the potential for failure during critical moments in the field. They also feature Trijicon's Manual Brightness Adjustment Override, which allows you to control the light output of the fiber-optics during daylight. AccuPoint riflescopes include other advanced elements like multi-layer coated lenses for superior light transmission with no distortion, quick-focus eyepiece, long-eye relief, and precise windage and elevation adjustments.
The newest innovation in rifle scopes, this Trijicon AccuPoint
features a Mil-Dot crosshair reticle with an illuminated center
dot. The scope is illuminated through the use of fiber optics
and tritium, providing a vivid aiming point without the need for
failure-prone batteries. The AccuPoint is also waterproof to ten
feet.
The TR20-2 also includes:
- 1 Trijicon Logo Sticker
- 1 LENSPEN
- 1 Set of Lenscaps
- 1 AccuPoint Manual
- 1 Warranty Card
| OPTICAL DATA |
Magnification |
3-9 |
Objective Size |
40 |
Bullet Drop Compensator |
No |
Length (in) |
12.20 |
Weight (oz) |
12.80 |
Illumination source |
Fiber Optics & Tritium |
Reticle Pattern |
Mil-Dot Crosshair |
Day Reticle Color |
Green |
Night Reticle Color |
Green |
Calibration |
N/A |
Bindon Aiming Concept |
N |
Eye Relief (in) |
3.6 to 3.2 |
Exit Pupil (mm) |
13.3 to 4.4 |
Field of View (°) |
6.45 to 2.15 |
Field of View @ 100yrds (ft) |
33.8 to 11.3 |
Adjustment @ 100 yds (clicks/in) |
4 |
Tube Size |
1 in. |
Mount |
Compatible with 1-inch ring mounts |
Mount On/Comes With |
N/A |
Housing Material |
6061-T6 aluminum, hard coat anodized per MIL-A-8625, Type III, Class 2 dull & non reflective |
Special Order |
No |
FREE: ACD - Anti-CANT Device, 1"- Black
The patented ACD (Anti-CANT Device) is a simple spirit level mounted in an aircraft-quality, two-piece aluminum scope rings that mounts in minuteswithout special tools. Properly mounted, the ACD allows the shooter to visualize and make adjustments for CANT, which experienced shooters recognize as rotation of a scope's crosshairs off a true vertical/horizontal plane. According to the Marine Corps Sniper Manual, compensating for CANT is critical to accurate long-distance shooting: At 1000 yards, 6 degrees of CANT (visualized as 1 minute on the face of a wristwatch) moves the bullet strike 55 inches from point of aim.
Weekend shooters who find varmints a challenge at several hundred yards are no less immune to CANT: 6 degrees of CANT at 100 yards gives the critters a new lease on life by a full 1/2 inch. Installed on a properly mounted rifle or pistol scope, the ACD uniquely equips the shooter to visualize and eliminate CANT with 100% certainty, 100% of the time.
The ACD has been extensively tested on rifles (does not require modification to the firearm or scope) and has stood up to heavy repeated recoil without shifting or detaching. Accuracy is within one-eighth of a degree. Mounts in minutes and can be placed either on top or below the scope, whichever is most comfortable for you and where it can be observed by the non-sighting eye.

- Eliminates 100% of CANT
- Accurate to within 1/8th of a degree
- Stands up to heaviest recoil
- Attaches in minutes without special tools
- No modification to scope or rifle required
- Works equally well on pistols or rifles
- Matches finish on most scopes
- Weighs less than 1/2 ounce
- Comes with complete instructions