Magpul MBUS Sight Set (Front & Rear) - GEN 2 with Free MSP Silicone Gun Cloth

Magpul MBUS Back-Up Rear Sight - GEN 2
 |
 |
click to enlarge |
The new MBUS (Magpul Back-Up Sight) GEN 2 is a low-cost, color injection molded, folding back-up sight.
The dual aperture MBUS Rear Sight is adjustable for windage and fits all MIL-STD-1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16/M4 platform.
Features
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to any MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons
- Protective wings shield the dual flip apertures
- Detent knob easily and positively adjusts windage
Specifications
- MBUS – Rear Gen 2
- Weight, w/ hardware: 1.3 oz.
- Height above rail, stowed: ~0.51 in.
- Length, stowed: 2.6 in.
- Length, deployed: 1.5 in.
NEW Features for GEN 2
- Reduced size for greater optics compatibility
- Both small and large apertures are on the same plane
Magpul MBUS Back-Up Front Sight - GEN 2
The new MBUS (Magpul Back-Up Sight) GEN 2 is a low-cost, color injection molded, folding back-up sight.
The MBUS Front Sight is adjustable for elevation and fits most Picatinny-railed hand guard equipped weapons, but is specifically tailored to the AR15/M16/M4 platform.
Features
- Impact resistant polymer construction provides light weight and resists operational abuse
- Spring-loaded flip up sight easily activated from either side or by pressing the top
- Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
- Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard and provides the same height-over-bore as standard A2 irons
- Protective wings shield the spring-locking A2 front sight post
Specifications
- MBUS – Front Gen 2
- Weight, w/ hardware: 1.2 oz.
- Height above rail, stowed: ~0.51 in.
- Length, stowed: 2.6 in.
- Length, deployed: 1.5 in.
NEW Features for GEN 2
- Reduced size for greater optics compatibility
- Spring-locking front sight post holds consistent elevation
NOTE: Cannot be mounted to a railed gas block due to excess heat issues.
Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is not compatible with the MOE Hand Guard.
Cloth May be use over and over again untill it wears out, Dot not wash this cloth.
Sise: 14" x 15"
Use on:
- Guns
- Gun Sights
- Fishing Reels
- Fishing Tactle
- Golf Clubs
- Tools
- Auto Accessories
Clean surface with high quality degreaser. Rub GUN & REEL CLOTH over surface until luster appears. You have then imparted a thin impervious film that will not evaporate or dry out for long periods of time. Re-wipe surface after handling your gun or reel. Triple treated with a new exclue blend of silicone with corrosion inhibitors. It will protect metal surfaces from rust and corrosion at extreme temperatures and conditions.