No matter what your mission, the dimensions and weight of your gear is a vital factor. With the Aimpoint Micro T-1, Aimpoint has introduced a system that provides the performance of our full-sized sights at the smallest package possible.
Constructed to supply the same ruggedness as other Aimpoint goods, the Micro T-1 performs reliably under extreme conditions while adding minimal weight to your weapon. Appropriate for use on
The Aimpoint Micro T-1 is ideal as a stand-alone sight, and might also be piggybacked on top of magnifying scopes, night vision, or thermal imaging optics.
The Micro T-1 might also be utilized by hunters and sports shooters who need night vision compatibility. The performance of the Micro T-1 is optimised for use with all generations of night vision devices (NVDs) but is fantastic for 3rd generation night vision technology.
Aimpoint's distinctive coating on the front lens reflects the dot's selected frequency of red light at near 100% efficiency to give the greatest possible dot brightness with the lowest amount of energy while other wavelengths from the visible and near-infrared part of the spectrum pass with at least reduction. This gives the clearest, brightest image possible when used with a 3rd generation Night Vision Device (NVD).
With 4 NVD-compatible brightness settings and eight daytime configurations including one extra-bright setting, the Micro T-1 is ready for around the clock use.
|System||Passive Red Dot Collimator Reflex Sight|
|Reticle, size||2 MOA|
|Optical coating||Anti Reflex and multi layer reflection coating|
|Battery Type||One 3 V lithium battery, type CR2032, commercially available|
|Battery Life, typical**||Over 5 years of continuous (day and night) use at pos 8 of 12 and|
|Switch, dot brightness||12 setttings, 12 Daylight of which 1Extra Bright,|
|Material housing||Extruded, high strength aluminium|
|Surface finish||anodized silver|
|Material lens covers||Rubber, black, non-glare finish|
|Adjustment||Range ±1 m at 100 meters (±1 yds at 100 yds) in windage and elevation,|
|Mounting||Keyed surface Patent pending mount keyed to the sight body to absorb recoil|
|Length||62 mm (2.4)|
|Width/height||41 mm x 36 mm (1.6 x 1.4) for sight only and 41 mm x 40 mm (1.6 x 1.6) for sight with Mount|
|Weight||84 grams (3.0 oz) Sight only, 105 grams (3.7 oz) Sight with Mount|
|Temperature Range||30 oC to +60 oC (-20 oF to +140 oF)|
|Water resistance||5 m (15 ft.)|
|The only difference between Micro R-1 and Micro H-1 is the color. The Micro T-1 is NVD compatible and carries other environmental specifications than the Micro H-1 and Micro R-1|
Quickly go from a primary, magnified optic to red dot action without head shift with the new Weaver Offset Rail Adaptor. This mount attaches to any Picatinny spec rail and allows shooters to attach a miniature red dot in the offset position. This mount can also be used for lights or other accessories that typically attach to a Picatinny spec rail.
Be the first to rate this item!Write Review