Aimpoint CompM4h, 2MOA Red Dot Sight, with A.R.M.S. #74 Throw Lever Mount & Spacer

Aimpoint CompM4h, 2MOA Red Dot Sight, with A.R.M.S. #74 Throw Lever Mount & Spacer
MSP Code: SP-003-12309-74-74SP
UPC Code: 91037134653
Price: $899.95

Status: Status: On Backorder, will take extra time to ship
Not Yet Rated | Write the First Review

Aimpoint CompM4h, 2MOA Red Dot Sight, with A.R.M.S. #74 Throw Lever Mount & Spacer

Aimpoint Comp M2 Aimpoint Comp M2
Aimpoint Comp M2 Aimpoint Comp M2
click to enlarge

Designed for 3rd generation night vision technology
The CompM4 sight can also be used by hunters and sport shooters who need night vision compatibility.
The performance of CompM4 sight is optimized for use with all generations of night vision devices (NVDs), but is ideal for 3rd generation night vision technology.

The clearest, brightest image possible
Aimpoint's unique coating on the front lens reflects the dot's selected frequency of red light at near 100% efficiency to give the highest possible dot brightness with the least amount of energy while other wavelengths in the visible and near-infrared part of the spectrum pass with a minimum of reduction. This provides the clearest, brightest image possible when used with a 3rd generation Night Vision Device (NVD).

Ready for use around the clock
With 7 NVD-compatible brightness settings and 9 daylight settings including one extra-bright setting, the CompM4 sight is ready for round the clock use.

Unique features of the CompM4

  • High battery compartment

Unique features of the CompM4 and CompM4s

  • Compatible with every generation of NVD
  • ACET technology allows up to 80,000 hours (over 8 years) of daytime operation on one AA battery
  • Internal voltage regulator allows the CompM4 to be used with any AA size battery
  • 7 NVD settings and 9 daylight settings
  • 500,000 hours of use on NVD setting
  • 2 MOA dot for close combat and long distance engagement
  • Matches perfectly with Aimpoint 3XMag
  • Unequalled light transmission
  • Front lens opening is threaded for addition of killFlash anti-reflective device
  • Submersible to 150 feet (45 meters)
  • Vertical spacer included
  • Type classified as the U.S. Army's new M68CCO
  • Improved adjustment caps are easier to remove and protected against impact
  • Can be used with a carry handle adapter for use on all M16 rifles
  • Mechanical switch for speed and reliability

Standard features for all Aimpoint sights

  • Unlimited field of view
  • Parallax-free and unlimited eye relief
  • Unaffected by extreme weather conditions
  • Rugged, durable construction
  • No hazardous materials
  • No laser emission that could be harmful to your eyes
  • Increased aiming confidence

Mounting for Aimpoint M4


System Passive Red Dot Collimator Reflex Sight
Magnification 1X
Eye relief Unlimited
Reticle, size 2 MOA
Optical coating Anti Reflex coating all surfaces. Multi-layer coating for reflection of Pass coating for NVD compatibility
Battery Type AA
Battery Life, typical** 80 000 hours for good quality battery
Switch, dot brightness 16 positions, 7 NVD, 9 daylight, of which 1 Extra bright
Material housing Extruded high strength aluminium
Surface finish Hard anodized, matte, black
Material lens covers Rubber, matte, black
Adjustment 1 click = 16 mm at 100 meters = 1/2" at 80 yds

A.R.M.S. #74 Comp M4 Throw Lever Mount with Spacer

Length 120 mm (4.7")
Width/height 53x60 mm (2.1"x2.4") sight only - 72x72 mm
Ring width none
Weight 265 g (9.3 oz) sight only
Temperature Range -45°C to +71°C (-50°F to 160°F)
Water resistance 45 m (150ft)
11972 CompM4
12172 CompM4s

Customer Ratings & Reviews

Be the first to rate this item!

Write Review
You May Also Like
Mounting Solutions Plus ©2016 All Rights Reserved 305-253-8393 $$
10655 S.W. 185 Terrace Miami FL 33157