AIMPOINT Micro T-1 - No matter what your mission, the size and weight of your equipment is a critical factor. With the AIMPOINT Micro T-1, Aimpoint has introduced an aiming system that provides the performance of our full-sized sights in the smallest package possible.
Built to offer the same battle proven ruggedness as other AIMPOINT products, the AIMPOINT Micro T-1 is able to perform under extreme conditions while adding negligible weight to your weapon. Suitable for use on Rifles, Carbines, Shotguns, Submachineguns and Handguns, the Aimpoint Micro T-1 is ideal as a stand-alone sight, and can also be “piggybacked” on top of larger magnifying scopes, night vision, or thermal imaging optics. The Micro T-1 can also be used by hunters and sport shooters that need night vision comptability.
The performance of the Micro T-1 is optimized for use with all generations of night vision devices (NVDs), but is especially suited for 3rd generation night vision technology. Aimpoint’s unique band-pass coating on the reflective lens reflects select frequencies of red light at near 100% efficiency in order to give the highest possible dot brightness, while transmitting nearly 100% of light in the Infrared and near-infrared part of the spectrum to provide the clearest, brightest image possible when used with a 3rd generation NVD. With 4 NVD-compatible brightness settings and 8 daylight settings including one extra-bright setting, the Micro T-1 is ready for use around the clock.
Unique features of the Aimpoint Micro T-1
Standard features for all Aimpoint sights
|System||Passive Red Dot Collimator Reflex Sight|
|Reticle, size||2 MOA|
|Optical coating||Anti Reflex and multi layer reflection coating|
|Battery Type||One 3 V lithium battery, type CR2032, commercially available|
|Battery Life, typical**||Over 5 years of continuous (day and night) use at pos 8 of 12 and|
|Switch, dot brightness||12 setttings, 12 Daylight of which 1Extra Bright,|
|Material housing||Extruded, high strength aluminium|
|Surface finish||anodized silver|
|Material lens covers||Rubber, black, non-glare finish|
|Adjustment||Range ±1 m at 100 meters (±1 yds at 100 yds) in windage and elevation,|
|Length||62 mm (2.4)|
|Width/height||41 mm x 36 mm (1.6 x 1.4) for sight only and|
|Weight||84 grams (3.0 oz) Sight only,|
|Temperature Range||30 oC to +60 oC (-20 oF to +140 oF)|
|Water resistance||5 m (15 ft.)|
|The only difference between Micro R-1 and Micro H-1 is the color. The Micro T-1 is NVD compatible and carries other environmental specifications than the Micro H-1 and Micro R-1|
Be the first to rate this item!Write Review