Aimpoint Micro T1 Red Dot Sight (4 MOA)

Aimpoint Micro T1 Red Dot Sight (4 MOA)

Aimpoint Micro T-1 Red Dot Sight - 4 MOA

One of the most important aspects of carrying around equipment on your rifle is the overall weight. When you consider the many hours it takes to engage in sports shooting or an all-night hunting session, the weight of the equipment on the rifle becomes a real factor. Aimpoint addresses the weight issue with their Micro T1 Red Dot Sight which is crafted from lightweight, durable materials and only weighs 3.7 ounces. Despite its relatively small size, it still has the features that shooters demand.

The casing is crafted from hard-anodized materials which make it very durable and resistant to the elements. Inside the Micro T1 Red Dot Sight is advanced circuitry that will work continuously for up to 5 years without turning the device off. Since it is in constant operation, you can use it immediately without having to wait for it to fully turn on.

There are eight different settings for daytime use which makes the T1 excellent under most types of lighting conditions. In addition, you can mount the T1 on many different types of hand guns, rifles, carbines, submachine guns, and even shotguns.

The band-pass coating on the front lens reflects selected types of red light so that the red dot will appear clearer. That feature improves aim and your overall performance. In addition, the same coating allows both the near infrared and infrared light to pass through clean which boosts the abilities of any night vision equipment used with the T1. The sight is compatible with night vision, magnifying, and thermal systems. It also includes four different settings for night vision which makes it work very well with the third generation of night vision devices.
Advantages

  • Compact & Lightweight at 3.7 ounces
  • Crafted from Durable, Hard-Anodized Materials
  • Eight Daytime Settings
  • Four Nighttime Settings
  • Uses Four Minutes of Angle Settings for Greater Accuracy
  • Waterproof up to 80 Feet
  • Easily Integrates with Picatinny Rail
  • 1x Parallax Free Optic that is non-magnifying
  • Works on Five Year Continuous Battery Charge
  • Works on Hand Guns, Rifles, Carbines, Sub Machine Guns, and Shotguns

The overall design of the Aimpoint Micro T1 Red Dot Sight allows for substantial improvement in your flexibility, accuracy, and overall performance. This device contains the classic Aimpoint advantages all in a compact sight.
Optical Data

  • System: Passive Red Dot Collimator Reflex Sight Device
  • Magnification: 1x
  • Eye Relief: Unlimited
  • Reticle Size: 4 MOA
  • Optical Coating: Anti-Reflex, Multi-Layer Reflective Coating

Mechanical Data

  • Housing: Extruded, High Strength Aluminum
  • Surface: Anodized Silver
  • Lens Covers: Black, Rubber, Non-Glare Finish
  • Mounting: Keyed Surface, Patent Pending Mount Keyed to Body to Absorb Recoil
  • Range: +/- 1 Yards at 100 Yards in Elevation & Windage

Electronic Data

  • Battery: CR2032 3V Lithium Battery
  • Battery Life: Over 5 Years of Continuous Use
  • Dot Brightness: 12 Settings, 12 Daylight & 1 Extra Bright

Environmental Data

  • Operates from -20 F to +140 F

Specs

  • Length: 2.4”
  • Width: 1.6” x 1.4” Sight, 1.6” x 1.6” Mount
  • Weight: 3.7 ounces w/Mount

The Micro R1 and H1 are separated only by their color. The Micro T1 is compatible with night vision devices and carries environmental specs different than the R1 and H1 versions.

 

OPTICAL DATA
System Passive Red Dot Collimator Reflex Sight
Magnification 1X
Eye relief Unlimited
Reticle, size 4 MOA
Optical coating Anti Reflex and multi layer reflection coating
ELECTRONIC DATA
Battery Type One 3 V lithium battery, type CR2032, commercially available
Battery Life, typical** Over 5 years of continuous (day and night) use at pos 8 of 12 and
Switch, dot brightness 12 setttings, 12 Daylight of which 1Extra Bright,
MECHANICAL DATA
Material housing Extruded, high strength aluminium
Surface finish anodized silver
Material lens covers Rubber, black, non-glare finish
Adjustment Range ±1 m at 100 meters (±1 yds at 100 yds) in windage and elevation,
Mounting Keyed surface Patent pending mount keyed to the sight body to absorb recoil
DIMENSIONS
Length 62 mm (2.4)
Width/height 41 mm x 36 mm (1.6” x 1.4”) for sight only and 41 mm x 40 mm (1.6” x 1.6”) for sight with Mount
Ring width none
Weight 84 grams (3.0 oz) Sight only, 105 grams (3.7 oz) Sight with Mount
ENVIRONMENTAL DATA
Temperature Range 30 oC to +60 oC (-20 oF to +140 oF)
Water resistance 5 m (15 ft.)
The only difference between Micro R-1 and Micro H-1 is the color. The Micro T-1 is NVD compatible and carries other environmental specifications than the Micro H-1 and Micro R-1

Customer Ratings & Reviews

1
Ratings Snapshot
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%
1 Total Reviews
  • 1
not for big astigmats.
5 out of 5
Location: USA
Date: November 12, 2011
if you have uncorrected astigmatism, the dot can range from a group of two or three and you have to pick the right dot.....as long as you are consistent in zeroing, you are ok
Recommended
1 Total Reviews
  • 1
MSP Code: AIM-11830
UPC Code: 7350004381418
Price: $719.00

Ratings Snapshot
5.0
out of 5
5 (1)
4 (0)
3 (0)
2 (0)
1 (0)
Would recommend this product.
100%


You May Also Like
Mounting Solutions Plus ©2016 All Rights Reserved (305) 253-8393,
10655 S.W. 185 Terrace Miami FL 33157