EGW Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA

EGW Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA

EGW Savage Round Back Long Action Picatinny Rail Scope Mount 20 MOA


Machined from: Domestic 6061 T6 Extruded Aluminum 
Finish: Matte Black 
Mounting Hardware: Hex head screws and wrench provided 
Center Spread: 4.630"
Overall Length: 7.458"

Custom 30 or 40 MOA is available. Please allow for a 3 week lead time for custom MOAs.

This mount comes standard with a bevel on both sides making it ambidextrous.

This mount does NOT fit the 212 

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.

Savages without an accu-trigger will require our flat back mount (listed separately). 

The middle spread is the distance between the two middle holes, center to center, on your receiver. 

This mount is available in 0 or 20 MOA. Please see our FAQ pages for more information on action lengths and MOA. 

Our mount is drilled for and provided with 6-48 Hex Head screws. Some Long Action Savage guns (like the .338 Lapua or 110 BA) require 8-40 screws. We recommend the HD Savage Round Back Long Action part #80330 or #80332 for these. Our mount is counter-sunk for 8-40 screws. We are happy to provide 8-40 screws in place of the 6-48 screws at no additional charge, if you are capable of modifying the mount yourself. For a $10 manual charge, we are happy to drill the mount to accomodate the 8-40 screws for you. This manual work will delay the shipping of your order by approximately 3 weeks & you will need to contact EGW to place your order over the phone. 

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. 

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Add EGW's Practical or HD Scope Rings to make it a complete overhaul! Available in matte black and silver.

This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

Customer Ratings & Reviews

Be the first to rate this item!

Write Review
MSP Code: 198-41102
Price: $39.99

Not Yet Rated | Write the First Review

You May Also Like
Mounting Solutions Plus ©2016 All Rights Reserved (305) 253-8393,
10655 S.W. 185 Terrace Miami FL 33157