My Cart: 0 item(s)

Every Shot Counts - Shipping Starts at 5.95
Product Search

Secure Checkout
Birchwood Casey Tru-Oil Stock Finish, 3 oz. liquid
    Birchwood Casey Tru-Oil Stock Finish, 3 oz. liquid
    Purchase Birchwood Casey Tru-Oil Stock Finish, 3 oz. liquid
    • Birchwood Casey Tru-Oil Stock Finish, 3 oz. liquid
      Ratings Snapshot
      5.0
      out of 5
      5 (12)
      4 (0)
      3 (0)
      2 (0)
      1 (0)
      Would recommend this product.
      100%
      SKU: 174-BC-23123
      UPC: 029057231236
      Manufacturer: Birchwood Casey

    • MSRP: $9.99
      $8.95

      19 available for immediate delivery

      Quantity in Basket:  None

    •  

    Birchwood Casey Tru Oil Stock Finish, 3 oz. liquid

    There is no better oil finish! Birchwood Casey Tru-Oil Gun Stock Finish has been the professional’s choice for gunstock finishing for more than 30 years. Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age. Excellent as a sealer for under butt plates, recoil pads and in inletted actions to prevent stock damage.

    Key Features of Birchwood Casey Tru Oil

    • The first choice of professionals for stock finishing.
    • Unique blend of linseed and natural oils dries fast and will not cloud, yellow or crack with age.
    • 3 fl oz, Plastic Bottle

     

    FAQ

    Q: What is Tru-Oil?
    A: Tru-Oil is a unique blend of linseed and natural oils for finishing your rifle stock. I\tdries fast and will not cloud, yellow or crack with age.

    Q: How can I increase the shelf life of Tru-Oil?
    A: To increase the shelf life of Tru-Oil poke, a small hole in the foil instead of pulling it all the way off and store the bottle upside down after opening.

    Q: Can Tru-Oil be thinned out?
    A: Tru-Oil can be thinned out using mineral spirits. Please note: Adding mineral spirits will increase drying time.

    Q: Will Tru-Oil change the color of the wood?
    A: No, Tru-Oil will not change the color, however it does have a golden hue amber tint that will enhance the wood.

    Q: Are Tru-Oil and lacquer compatible?
    A: No.

    Q: Will Tru-Oil work on laminate?
    A: Yes.

    Q: Before using Tru-Oil should I use a water-based stain or an oil-based stain?
    A: We recommend using a water-based stain. If using an oil-based stain, allow extra dry time.

    Q: How do I apply Tru-Oil?
    A: Apply Tru-Oil using your finger or a lint free cloth.

    Q: How long until Tru-Oil is dry to the touch?
    A: Tru-Oil will be dry to the touch in approximately 2-4 hours, depending on climate. We recommending allowing 12 + hours between coats of Tru-Oil.

    Q: How long is recommended between coats of Tru-Oil?
    A: We recommending allowing 12 + hours between coats.

    Q: What temperature works best for applying Tru-Oil?
    A: Room temperature is ideal for applying Tru-Oil. It will dry faster in low humidity as well.

    Q: Can I add linseed to increase dry time?
    A: Not recommended.

    Q: Will Tru-Oil penetrate oily wood?
    A: Tru-Oil has a difficult time penetrating and drying on oily woods (i.e. ebony rosewood and cocobolo). If using an oily wood, you can try using mineral spirits to thin out the Tru-Oil or seal the wood prior to the Tru-Oil application.

    Q: How long do I need to wait until rubbing Tru-Oil out with abrasive agent?
    A: If using Stock Sheen and Conditioner, wait a minimum of 7 days. If using Rotten stone, wait one month after Tru-Oil application.

    NOT AVAILABLE FOR SALE IN CALIFORNIA

     

    Alt Description:

    • tru oil
    • birchwood casey tru oil
    • tru-oil
    • tru oil finish
    • truoil
    • birchwood tru oil
    • birchwood casey tru-oil
    • birchwood casey tru oil stock finish 3 ounce
    • tru oil gun stock finish
    • tru oil for sale
    • birchwood oil
    • tru oil gun stock

    The distinction between inferior quality and premium Tru Oil undeniable. At MSP, we only offer Gun Refinishing supplies from the most trusted brands like Birchwood Casey. Buy with confidence that we stand behind the product we sell.

    WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.

    Customer Ratings & Reviews

    12
    Ratings Snapshot
    5.0
    out of 5
    5 (12)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    5.0
    out of 5
    5 (12)
    4 (0)
    3 (0)
    2 (0)
    1 (0)
    Would recommend this product.
    100%
    12 Total Reviews
    • 1

    Best deal on a bottle of tru oil for sale right here

    5 out of 5
    Location:
    Date: February 22, 2021

    Best finish for gun stocks ever! I would definitely buy it again. I have a suggestion for those who had their tru-oil from the skin in the bottle. After I opened mine, I poured out a small amount for use and firstly, DID NOT return unused portions to the bottle. Secondly, to increase the seal integrity, I used an approximate 5" wide strip of cellophane wrap folded in half, placed over the bottleneck then screwed the cap back on. Mine has been opened now for about a month and a half, and as yet I have NO skinning over of the remainder. It worked for me; it probably will for you too. I was able to reseal the bottle this way five times before I needed new cellophane.

    Recommended

    Woodwwoorker

    5 out of 5
    Location: Homosassa Fl.
    Date: July 10, 2020

    great product

    Verified Buyer Recommended

    Perfect finish for any gun stock or grip

    5 out of 5
    Location:
    Date: February 26, 2020

    Refinished two old 22's got the refinishing kit, which included a walnut stain, (womp, womp, read a review of that product) the standout in the kit was the tru-oil. I sanded the guns down and used the tru-oil and some medium sandpaper to make a slurry filling a few pits & dings in a well worn old savage model 3, allowing 24 hours between coats. Then would sand between applications with finer & finer sandpaper, applying about 5 or 6 coats total, finishing with a microfiber towel to apply a very light final coat. After curing, it looked beautiful and continues to harden. The 3oz size is perfect because once open, the liquid can skin over or gel with extended storage. It did two long guns with almost no waste. The only drawback was the smell, which was not terrible, but noticeable and did dissipate.

    Recommended

    Tru-oil Works!

    5 out of 5
    Location:
    Date: February 26, 2020

    Birchwood Casey tru oil works well! Follow the directions; thin coat means thin. I refinished an old marlin 336 that was somewhat beat up. It turned out great. I sanded the finish and stained off and used a home depot gun-stock stain then the tru-oil. Be prepared. It does take at least four coats with 24 hours in between—sand with fine steel wool between each layer. The results are amazing! The 3 oz bottle is enough to refinish several stocks. If you sand it down to bare wood, I would recommend using a sealer to fill in the pores of the wood before the stain.

    Recommended

    tru oil gunstock finish

    5 out of 5
    Location:
    Date: January 2, 2020

    What can I say? Birchwood Casey tru oil is an excellent product if you want a shiny finish on your wooden gunstock. After prepping the stock (sanding, stripping, staining, etc.) I apply thin coats with fingers until the pores in the wood are filled, and the surface is smooth. May take 15-20 layers or more, with surface smoothing with 000 or 0000 steel wool between coats. It helps to coat the stock entirely from end to end, in other words, don't do one side then the other, it starts to dry, and it's hard to blend the two areas. It gives you a deep glistening sheen that shows the wood grain very nicely. One tip is to store the bottle upside down. Even if you replace the cap securely, the product will get a "skin" on top, so storing it on its cap will prevent this. One bottle will do at least 3 or 4 full stocks.

    Recommended

    Birchwood Casey tru oil stock finish is a great product

    5 out of 5
    Location:
    Date: November 15, 2019

    I've refinished many stocks over the years and always used Tung Oil in the past. I recently ran out and ordered Tru-Oil to try. It was much easier to use, and I believe the results were even better. A great product!

    Recommended

    Tru Oil Gunstock finish is the Best

    5 out of 5
    Location:
    Date: November 15, 2019

    Birchwood Casey Tru Oil is probably the best available, in my opinion, and I've used pretty much all of them over the years. It's easy to use. You simply rub in as many coats as needed. It dries quickly can be rubbed down with steel wool or other abrasive materials to achieve the luster you want. It is time-consuming as it will take a lot of coats on most stocks as walnut is the most popular and has open pores. It does not take as many coats when working with maple or cherry in order to achieve the same results. One bottle will do several rifle stocks.

    Recommended

    Birchwood Casey Tru Oil is a WINNER

    5 out of 5
    Location:
    Date: November 15, 2019

    In the past, I used other products that cost a lot more, I mean 4x or even 5x more than Tru Oil, but results didn't come close to the results I achieve with this product. I got rid of all other finishing, sealing products and now use Birchwood Casey products exclusively for refinishing my stocks. I wish all inexpensive products performed like this one. It's a WINNER! No need to spend even if you're a stock maker.

    Recommended

    Birchwood Tru Oil is the best

    5 out of 5
    Location:
    Date: November 7, 2019

    I've used this Birchwood Tru Oil for years, everything from gun stocks to cane shafts & handles. I recommend it highly!

    Recommended

    Birchwood Casey Tru Oil penetrates and protects

    5 out of 5
    Location:
    Date: October 29, 2019

    I use Birchwood Casey Tru Oil for creating custom made knife handles. It penetrates and protects the wood and gives it a nice shine — two layers with 24hrs in between to properly dry work great. Too many layers and the wood surface becomes too slippery. It works great and easy to apply.

    Recommended

    A little goes a long way.

    5 out of 5
    Location:
    Date: August 5, 2019

    In my ignorance, I thought tru oil was... Oil and my stock would be oily, In a way it is oil, but this liquid dries just like varnish! Best for a glossy hard finish, particularly on water-based stain! Extremely sticky, so use newspapers and don't touch anything until after. Make sure to use a solvent to clean your fingers when don! Multi coats are easy to apply, and runs are few and easily fixed. Done six coats on a stock, and still, have 3/4 bottle left. First Birchwood product is happy with!

    Recommended

    Simply one of the best general-purpose wood finishes available.

    5 out of 5
    Location:
    Date: June 24, 2019

    I've been using Tru Oil for a couple of decades now, and frankly, there is no other wood finish that performs the way this stuff does. I've finished wood projects with about every brand and type of wood finish available. Tru Oil is not just another oil finish like the big box linseed, Danish, teak, or tung oils. It belongs to a specialized class of oil finishes known as "polymerized tung oils." To create this kind of product is a process the involves heating it in an oxygen-free environment. The result is an oil that dries like a polymer -- virtually an oil-based product that performs like a polyurethane. If you've ever finished with straight tung oil or even boiled linseed oil you know occasionally, you will put on a coat that gets gummy and never dries. This is usually due to environmental factors that are sometimes hard to manage, like the temp and humidity. Polymerized oils are the solution to that problem, but manufacturers typically don't like to make this class of finish because it is not stable once it has been exposed to oxygen. There are just a few products on the market that are actual polymerized tung oil, and this is one of them. Buy it in the small bottles or re-package it to remove all the air from the containers, and it will last a little longer for you. I've heard of guys that fill the jar with marbles as they use it to keep the air out. Similar products are typically only available through very specialized woodworker supply houses, but you can find Tru Oil practically anywhere in outdoor sporting goods departments. Performance? I've finished a cherry gun cleaning box with this that has traveled half the year since 2006. It gets soaked with a myriad of harsh cleaning chemicals, solvents (including brake cleaner!), and every other kind of abuse you can imagine. The box is looking tired, but overall the Tru Oil finish on it has held up beautifully. If it can protect my cleaning box, it will do excellent on your firearm, musical instrument, or exceptional furniture project. Hints on use: apply and rubdown your sealer and filler coats first. Buff them out with 0000 Steel Wool before starting the Tru Oil coats then just oil-dry-buff until you get your desired finish. As little as two layers can make a durable glossy finish, but I like to take it out to 4-6 or even 8 for a deep luster. For guns, I prefer the satin finish from buffing it out after the last coat, but then I'm a softy for that old-world look when I'm building a new rifle stock. I don't want it to look like it just came from some factory paint booth and this is the perfect product for what I want to achieve.

    Recommended
    12 Total Reviews
    • 1


    Related Products